[RTTY] How to handle a pileup on RTTY

[Robert Jonsson]

Doing it this way only makes the other station ask for my callsign waisting
a lot of time doing the report all over.
I do it 
K6LL 599 001 DE TF3TTY

IT GIVES ME A QSL RIGHT BACK and we are done.
73 de tf3tty

-----Original Message-----
From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On
Behalf Of Bill Turner
Sent: 26. júlí 2006 17:39
To: WW3S
Cc: rtty at contesting.com
Subject: Re: [RTTY] How to handle a pileup on RTTY

ORIGINAL MESSAGE:

On Wed, 26 Jul 2006 07:21:54 -0400, you wrote:


>so far all good tips but one I havent seen yet is to resend the station
>callsign at the end of the transmission, that way if it was lost the first
>time, they should be able to get it at the end....
>
>Example:
>
>K6LL 599 HI K6LL

------------ REPLY SEPARATOR ------------

The only problem with sending the other guy's call last is that is not
the traditional way of doing it. Normally, YOUR call goes last.

A savvy op will usually figure out what's going on, but with QRM/QRN
there is always the possibility of error.

For my macros, I put my call last.

Bill, W6WRT
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty