[RTTY] Rig Blaster Pro + Kenwood TS 2000

[ea8auw at cidxs.com]

Hi Rich !

if, I have the Rig by USB port....

Now, I have selected the option D: Polling and limited speed, but I am
testing some days ago the option C: limiting speed, But not problems I
take it note of your information and I change to C: option.

when arrive to my QTH, I made all this change for to see if in this time
the use of my Rig is good.

Thanks you very much again.

73 TU de Edu EA8AUW


> Edu,
>
> You did not mention what kind of serial port you have connected to the
> Rigblaster Pro. If it is connected to a USB port on the computer, then in
> the MMTTY Option -> Setup MMTTY window under the Misc tab you need to
> click
> on the button called USB Port and select Option C. Limiting Speed.
>
> 73,
> Rich VE3KI
>
>