[RTTY] PK232

[Anthony(N2KI)]

I loaded it up to my website. www.n2ki.com


 
Anthony - N2KI
 
 
-----Original Message-----
From: Richard Schumann [mailto:richardschumann at comcast.net] 
Sent: Thursday, February 21, 2008 9:50 PM
To: Anthony(N2KI)
Subject: Re: [RTTY] PK232

Hi Anthony,

I would be interested....are we able to download it from your website?

Tnx,

Richard kn7sfz


----- Original Message ----- 
From: "Anthony(N2KI)" <n2ki at amsat.org>
To: "RTTY" <rtty at contesting.com>
Sent: Thursday, February 21, 2008 7:45 AM
Subject: Re: [RTTY] PK232


> If anyone needs a copy of the original PC Pakratt II, I have it. 1993
> vintage.
> 
> 
> Anthony - N2KI
> 
> 
> -----Original Message-----
> From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On
> Behalf Of Joe Subich, W4TV
> Sent: Thursday, February 21, 2008 9:38 AM
> To: 'Steve and Judy'; rtty at contesting.com
> Subject: Re: [RTTY] PK232
> 
> 
> Steve, 
> 
>> I did forget to add that I am also using the Microham MK2R+.
> 
> MK2R+ gets its digital mode audio from the ACCC1 jack.  Other 
> than simply feeding the PK232 from the speaker or pin 8 of the 
> mic jack, the only way to pick up audio is to build an 8-pin 
> DIN "Y" cable or similar cable adapter to break out the audio 
> from pins 5 (audio) and 2 (ground).
> 
> Be careful connecting parallel loads at pin 5.  The output 
> impedance is relatively high (4.7K).  Connecting a low 
> impedance device in parallel with a high impedance device 
> can result in unpredictable performance.   
> 
> 73, 
> 
>   ... Joe Subich, W4TV 
>       microHAM America 
>       http://www.microHAM-USA.com 
>       http://groups.yahoo.com/group/microHAM 
>       support at microham.com 
> 
> 
> 
>> -----Original Message-----
>> From: rtty-bounces at contesting.com 
>> [mailto:rtty-bounces at contesting.com] On Behalf Of Steve and Judy
>> Sent: Thursday, February 21, 2008 3:24 AM
>> To: rtty at contesting.com
>> Subject: [RTTY] PK232
>> 
>> 
>> 
>> Thanks for all the replies to my Q.
>> 
>> I did forget to add that I am also using the Microham MK2R+.
>> 
>> 
>> Does anyone know how I can use a PK232 just as a tuning 
>> indicator when running Win-Test and the MMTTY engine into an 
>> Icom 756 pro3 .
>> Something simple please !
>> 
>> Any help will be much appreciated.
>> 
>> 73 Steve  ZC4Li.
>> 
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
> 
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>