[RTTY] PK232

[Richard Schumann]

Got it....thanks!

Richard kn7sfz


----- Original Message ----- 
From: "Anthony(N2KI)" <n2ki at amsat.org>
To: "RTTY" <rtty at contesting.com>
Sent: Thursday, February 21, 2008 7:18 PM
Subject: Re: [RTTY] PK232


>I loaded it up to my website. www.n2ki.com
>
>
>
> Anthony - N2KI
>
>
> -----Original Message-----
> From: Richard Schumann [mailto:richardschumann at comcast.net]
> Sent: Thursday, February 21, 2008 9:50 PM
> To: Anthony(N2KI)
> Subject: Re: [RTTY] PK232
>
> Hi Anthony,
>
> I would be interested....are we able to download it from your website?
>
> Tnx,
>
> Richard kn7sfz
>
>
> ----- Original Message ----- 
> From: "Anthony(N2KI)" <n2ki at amsat.org>
> To: "RTTY" <rtty at contesting.com>
> Sent: Thursday, February 21, 2008 7:45 AM
> Subject: Re: [RTTY] PK232
>
>
>> If anyone needs a copy of the original PC Pakratt II, I have it. 1993
>> vintage.
>>
>>
>> Anthony - N2KI
>>
>>
>> -----Original Message-----
>> From: rtty-bounces at contesting.com [mailto:rtty-bounces at contesting.com] On
>> Behalf Of Joe Subich, W4TV
>> Sent: Thursday, February 21, 2008 9:38 AM
>> To: 'Steve and Judy'; rtty at contesting.com
>> Subject: Re: [RTTY] PK232
>>
>>
>> Steve,
>>
>>> I did forget to add that I am also using the Microham MK2R+.
>>
>> MK2R+ gets its digital mode audio from the ACCC1 jack.  Other
>> than simply feeding the PK232 from the speaker or pin 8 of the
>> mic jack, the only way to pick up audio is to build an 8-pin
>> DIN "Y" cable or similar cable adapter to break out the audio
>> from pins 5 (audio) and 2 (ground).
>>
>> Be careful connecting parallel loads at pin 5.  The output
>> impedance is relatively high (4.7K).  Connecting a low
>> impedance device in parallel with a high impedance device
>> can result in unpredictable performance.
>>
>> 73,
>>
>>   ... Joe Subich, W4TV
>>       microHAM America
>>       http://www.microHAM-USA.com
>>       http://groups.yahoo.com/group/microHAM
>>       support at microham.com
>>
>>
>>
>>> -----Original Message-----
>>> From: rtty-bounces at contesting.com
>>> [mailto:rtty-bounces at contesting.com] On Behalf Of Steve and Judy
>>> Sent: Thursday, February 21, 2008 3:24 AM
>>> To: rtty at contesting.com
>>> Subject: [RTTY] PK232
>>>
>>>
>>>
>>> Thanks for all the replies to my Q.
>>>
>>> I did forget to add that I am also using the Microham MK2R+.
>>>
>>>
>>> Does anyone know how I can use a PK232 just as a tuning
>>> indicator when running Win-Test and the MMTTY engine into an
>>> Icom 756 pro3 .
>>> Something simple please !
>>>
>>> Any help will be much appreciated.
>>>
>>> 73 Steve  ZC4Li.
>>>
>>> _______________________________________________
>>> RTTY mailing list
>>> RTTY at contesting.com
>>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>>
>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>
>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>