[RTTY] N1MM and MMTTY setup

[Ekki Plicht (DF4OR)]

On Thursday 03 January 2008, Tad Danley wrote:
> Trying to get N1MM and MMTTY set up for the very first time with my
> ProII.  Been listening to the W1AW RTTY bulletin this evening.
> Everything prints fine on the ProII scope using the built-in RTTY
> decoder, but only garbage prints in MMTTY.  Not sure where to start,
> also using a microKEYER.  Settings in MMTTY are 'default', and the
> signal levels and tuning appear to be spot on.
>
> Any suggestions on things to check out?  Thanks in advance!

Further to Johns notes I think you should decide whether you want to transmit 
FSK or AFSK. I would prefer FSK. So set up a FSK port in the urouter software 
from the microkeyer, assign that to MMTTY. Set the Pro2 to RTTY (not xSB-D).

When setting up MMTTY play around with the USB port handling, on some slower 
computers it might be necessary to use USB polling.

73,
Ekki, DF4OR