[RTTY] USOS FIGS

rick darwicki n6pe at yahoo.com
Sun Jul 5 08:52:34 PDT 2009


f346 8g5343w5348gr

So for standard HAM operation I should set USOS to ON and FIGS to off?

Send (space)599-001-001 in contests and (space)599(space)001(space)001 if asked for a repeat?

Well, it might all be mute when you make as few contacts as I usually do hi hi.


Rick, N6PE
===============================================================
Remember, E = M * C^2 was not the entire equation.


--- On Sun, 7/5/09, rtty-request at contesting.com <rtty-request at contesting.com> wrote:

> From: rtty-request at contesting.com <rtty-request at contesting.com>
> Subject: RTTY Digest, Vol 79, Issue 5
> To: rtty at contesting.com
> Date: Sunday, July 5, 2009, 7:43 AM
> Send RTTY mailing list submissions
> to
>     rtty at contesting.com
> 
> To subscribe or unsubscribe via the World Wide Web, visit
>     http://lists.contesting.com/mailman/listinfo/rtty
> or, via email, send a message with subject or body 'help'
> to
>     rtty-request at contesting.com
> 
> You can reach the person managing the list at
>     rtty-owner at contesting.com
> 
> When replying, please edit your Subject line so it is more
> specific
> than "Re: Contents of RTTY digest..."
> 
> 
> Today's Topics:
> 
>    1. VY2SS Cut Numbers in DL-DX (Tim
> Goeppinger)
>    2.  VY2SS Cut Numbers in DL-DX (John
> Schreibmaier)
>    3. Re: VY2SS Cut Numbers in DL-DX (Jerry
> Flanders)
>    4. Re: VY2SS Cut Numbers (Tim
> Goeppinger)
>    5. Re: VY2SS Cut Numbers (Jim W7RY)
>    6. Re: VY2SS Cut Numbers in DL-DX (Kok
> Chen)
>    7. Re: VY2SS Cut Numbers in DL-DX (Kok
> Chen)
>    8. DL4R  in DL-DX RTTY Contest
> (Dallmeier, Walter)
>    9. Sogs for DL-DX RTTY contest (Bill,
> W6WRT)
>   10. Re: Logs for DL-DX RTTY contest (Bernd DC3HB)
>   11. DL-DX RTTY Contest - Logs (Bernd DC3HB)
>   12. Re: DL-DX RTTY Contest - Logs (Andrei
> Stchislenok)
> 
> 
> ----------------------------------------------------------------------
> 
> Message: 1
> Date: Sat, 4 Jul 2009 13:15:23 -0700 (PDT)
> From: Tim Goeppinger <timgep at yahoo.com>
> Subject: [RTTY] VY2SS Cut Numbers in DL-DX
> To: rtty at contesting.com
> Message-ID: <877623.95376.qm at web55308.mail.re4.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> 
> 
> Why is it that everyone else can copy his cut numbers,
> except me
> and N6QQ?   I did not receive a decoder
> ring.
> 
> He is sending numbers out like WIE  WOY 
> etc.  Everyone just says
> QSL, and goes on with QSO.
> 
> Tim K6GEP
> 
> 
>       
> 
> 
> ------------------------------
> 
> Message: 2
> Date: Sat, 04 Jul 2009 16:19:39 -0400
> From: John Schreibmaier <w3mf at ptd.net>
> Subject: [RTTY]  VY2SS Cut Numbers in DL-DX
> To: rtty at contesting.com
> Message-ID: <4A4FB95B.8030200 at ptd.net>
> Content-Type: text/plain; charset=ISO-8859-1;
> format=flowed
> 
> WIE=283
> 
> WOY=296
> 
> 
> -- 
> +------------------------------------------------------+
> | John Schreibmaier W3MF | E-mail: w3mf at ptd.net 
>       |
> | Kresgeville, PA 18333  | http://www.schreibmaier.org |
> +------------------------------------------------------+
> 
> 
> ------------------------------
> 
> Message: 3
> Date: Sat, 04 Jul 2009 20:22:52 +0000
> From: Jerry Flanders <jeflanders at comcast.net>
> Subject: Re: [RTTY] VY2SS Cut Numbers in DL-DX
> To: Tim Goeppinger <timgep at yahoo.com>
> Cc: rtty at contesting.com
> Message-ID: <20090704202255.AB4EF1B6060C at dayton.contesting.com>
> Content-Type: text/plain; charset="us-ascii";
> format=flowed
> 
> In letters case, 283 prints as WIE and 296 prints as WOY. 
> GOOGLE  [baudot letters figures characters].
> 
> Jerry W4UK
> 
> At 20:15 7/4/2009, you wrote:
> 
> >Why is it that everyone else can copy his cut numbers,
> except me
> >and N6QQ?   I did not receive a decoder
> ring.
> >
> >He is sending numbers out like WIE  WOY 
> etc.  Everyone just says
> >QSL, and goes on with QSO.
> >
> >Tim K6GEP
> >
> >
> >
> >_______________________________________________
> >RTTY mailing list
> >RTTY at contesting.com
> >http://lists.contesting.com/mailman/listinfo/rtty
> 
> 
> 
> ------------------------------
> 
> Message: 4
> Date: Sat, 4 Jul 2009 13:41:35 -0700 (PDT)
> From: Tim Goeppinger <timgep at yahoo.com>
> Subject: Re: [RTTY] VY2SS Cut Numbers
> To: rtty at contesting.com
> Message-ID: <281569.87392.qm at web55302.mail.re4.yahoo.com>
> Content-Type: text/plain; charset=us-ascii
> 
> 
> Thanks for all the replies.  I will have to use that
> handy Baudot
> chart in Wikipedia next time.  Plus, someone emailed
> and suggested
> turning off UOS.
> 
> What was weird was VY2SS was sending 599 WIE WIE . 
> Don't know
> how that happens.
> 
> Tnx for all the replies.  Is is just me, or are condix
> really bad?
> I hope this is not a bad open for IARU HF next weekend.
> 
> Tim K6GEP
> 
> 
>       
> 
> 
> ------------------------------
> 
> Message: 5
> Date: Sat, 4 Jul 2009 14:01:44 -0700
> From: "Jim W7RY" <w7ry at arrl.net>
> Subject: Re: [RTTY] VY2SS Cut Numbers
> To: "Tim Goeppinger" <timgep at yahoo.com>,
> <rtty at contesting.com>
> Message-ID: <8D08443D98CE4B548ABDDA50599AF51E at JimPC>
> Content-Type: text/plain; format=flowed;
> charset="iso-8859-1";
>     reply-type=original
> 
> I'm wrong... USOS is what you don't want!  You want to
> have upper case 
> (figures) when numbers are sent.  You don't need a
> chat to translate.... 
> Simply look at your keyboard...
> 
> 599 is TOO. (100 is QPP) Just simply translate to the
> number that is up and 
> to the left of the letters you get instead of numbers in
> the report.
> 
> 73
> Jim W7RY
> 
> 
> ----- Original Message ----- 
> From: "Tim Goeppinger" <timgep at yahoo.com>
> To: <rtty at contesting.com>
> Sent: Saturday, July 04, 2009 1:41 PM
> Subject: Re: [RTTY] VY2SS Cut Numbers
> 
> 
> >
> > Thanks for all the replies.  I will have to use
> that handy Baudot
> > chart in Wikipedia next time.  Plus, someone
> emailed and suggested
> > turning off UOS.
> >
> > What was weird was VY2SS was sending 599 WIE WIE
> .  Don't know
> > how that happens.
> >
> > Tnx for all the replies.  Is is just me, or are
> condix really bad?
> > I hope this is not a bad open for IARU HF next
> weekend.
> >
> > Tim K6GEP
> >
> >
> >
> > _______________________________________________
> > RTTY mailing list
> > RTTY at contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> 
> 
> --------------------------------------------------------------------------------
> 
> 
> 
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.375 / Virus Database: 270.13.3/2217 - Release
> Date: 07/03/09 
> 18:11:00
> 
> 
> 
> ------------------------------
> 
> Message: 6
> Date: Sat, 04 Jul 2009 14:10:14 -0700
> From: Kok Chen <chen at mac.com>
> Subject: Re: [RTTY] VY2SS Cut Numbers in DL-DX
> To: RTTY Reflector <rtty at contesting.com>
> Cc: Tim Goeppinger <timgep at yahoo.com>
> Message-ID: <ED23B8DE-3169-4DFC-8506-7EDD0BC296C7 at mac.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed;
> delsp=yes
> 
> 
> On Jul 4, 2009, at 1:15 PM, Tim Goeppinger wrote:
> 
> > Why is it that everyone else can copy his cut numbers,
> except me
> > and N6QQ?
> 
> Those are not cut numbers.  It is the result of one
> station (receiver)  
> using USOS and the other station (sender) not using USOS.
> 
> Believe it or not, it is addressed in the "Digital Modes"
> chapter in  
> the 2010 ARRL Handbook, but you need to wait for a while
> longer for it  
> to be published :-).
> 
> In short, if the sender is not using USOS, the LTRS/FIGS
> state is  
> unchanged after a space character.  So a 599 283 will
> be sent as  
> 599<shift>283.  However, if the receiver is
> using USOS, then it is  
> decoded as the equivalent of
> 599<shift><LTRS>283.  Unfortunately, 
> 
> "283" under LTRS shift is decoded into "WIE," so you would
> print 599  
> WIE.
> 
> When you are mostly sending numbers, USOS is of dubious
> use. In the  
> case above, if the sender had used USOS, he would need to
> send an  
> extra FIGS after the space.  USOS is useful for
> sending long text  
> paragraphs that have mostly LTRS shifted characters -- any
> noise hit  
> that causes an erroneous FIGS to be received will be
> corrected the  
> next time a <space> is transmitted.
> 
> > I did not receive a decoder ring.
> 
> Sure you have (unless you are using a Dvorak
> keyboard).  But you might  
> not realize that you have the decoder ring right at your
> fingertips.
> 
> If your contest program does not have a quick way to switch
> the  
> display between the two shifts, just look at the numeric
> row of a  
> QWERTY keyboard and the row of keys under it.  You
> will find that they  
> have a direct relationship in Baudot.  I.e., Q=1, W=2,
> etc.
> 
> Hint: if you send 599-001 under RTTY, it will be received
> correctly by  
> both USOS and non-USOS decoders.  It may not be
> pretty, but it works  
> and requires no extraneous FIGS code to be sent.
> 
> 73
> Chen, W7AY
> 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 7
> Date: Sat, 04 Jul 2009 14:17:59 -0700
> From: Kok Chen <chen at mac.com>
> Subject: Re: [RTTY] VY2SS Cut Numbers in DL-DX
> To: RTTY Reflector <rtty at contesting.com>
> Cc: Tim Goeppinger <timgep at yahoo.com>
> Message-ID: <F846CAB4-3547-47BB-99AB-7F84CC139642 at mac.com>
> Content-Type: text/plain; charset=US-ASCII; format=flowed
> 
> 
> On Jul 4, 2009, at 2:10 PM, Kok Chen wrote:
> 
> > So a 599 283 will be sent as
> > 599<shift>283.  However, if the receiver is
> using USOS, then it is
> > decoded as the equivalent of
> 599<shift><LTRS>283.
> 
> Oops, I meant <space> instead of <shift>, in
> the above.  Sorry.
> 
> 73
> Chen, W7AY
> 
> 
> 
> ------------------------------
> 
> Message: 8
> Date: Sun, 5 Jul 2009 13:38:59 +0200
> From: "Dallmeier, Walter" <walter.dallmeier at dl4rck.de>
> Subject: [RTTY] DL4R  in DL-DX RTTY Contest
> To: "rtty at contesting.com"
> <rtty at contesting.com>
> Message-ID:
>     <E6AFE4AFFD7D454EA50E2FFE3BAEEE35153EBCF7 at winxbede10.exchange.xchg>
> Content-Type: text/plain; charset="iso-8859-1"
> 
> Hello,
> 
> a hard job the DL-DX RTTY Contest, with strange
> conditions.
> Had to interrupt a couple times cause of heavy
> thunderstorms in my region.
> 
> Many thanks to all who give me a call.
> 
> 73 de Walter, DL4RCK, DL4R
> 
> 
> DL-DX RTTY Contest
> 
> Callsign         : DL4R
> Operators        : DL4RCK
> Category         : A Single
> OP, 1 Radio
> Club Competition : DRCG
> Power            :
> HIGH   600 Watt
> Operating Time   : 18:03 h
> Software         : RCKLog
> V3.9
> 
> BAND  QSOs  Valid QSOs  Points  DXCCs
> Distr.
> 10      57   
>    57   
>    560     19 
>   0
> 15     125     
> 124      1290 
>    40    5
> 20     272     
> 270      3139 
>    54   13
> 40     144     
> 144      1485 
>    35    5
> 80      77   
>    77   
>    734     23 
>   1
> --------------------------------------------
>        675     
> 672      7208   
> 171   24
> 
> Final Score: 7208 * (171+24) = 1.405.560
> 
> Equipment:
> Yaesu FT-1000MP MV, ACOM1000
> 3 El.SteppIR Yagi 10/15/20m
> BigIR 10-80m, G5RV
> 
> 
> ?
> 73 de Walter, DL4RCK, DL4R
> 
> Walter Dallmeier
> Email: walter.dallmeier at dl4rck.de
> 
> http://www.dl4rck.de
> http://www.rckrtty.de
> http://www.rcklog.de
> http://www.drcg.de 
> 
> 
> 
> 
> ------------------------------
> 
> Message: 9
> Date: Sun, 05 Jul 2009 04:42:50 -0700
> From: "Bill, W6WRT" <dezrat1242 at yahoo.com>
> Subject: [RTTY] Sogs for DL-DX RTTY contest
> To: rtty at contesting.com
> Message-ID: <t04155l2ifmnoral0h9pgefpuj5sbvtk20 at 4ax.com>
> Content-Type: text/plain; charset=us-ascii
> 
> If you are submitting a Cabrillo log for the DL-DX contest,
> please note the
> contest name may be different from what your contest
> program generates.
> 
> An example of correct format is at
> 
> http://drcg.de/index.php?option=com_content&task=view&id=25&Itemid=36
> 
> 
> 
> 73, Bill W6WRT
> 
> 
> ------------------------------
> 
> Message: 10
> Date: Sun, 05 Jul 2009 16:04:56 +0200
> From: Bernd DC3HB <dc3hb at freenet.de>
> Subject: Re: [RTTY] Logs for DL-DX RTTY contest
> To: dezrat1242 at yahoo.com,
> RTTY at contesting.com
> Message-ID: <4A50B308.8090002 at freenet.de>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> Hi Bill,
> 
> the contest name is not so important.
> 
> Important are the CATEGORY: and CALLSIGN: line. See also my
> next posting
> in the reflector.
> 
> 73 Bernd, DC3HB
> DL-DX RTTY Contest Manager
> 
> 
> Please look at
> Bill, W6WRT schrieb:
> > If you are submitting a Cabrillo log for the DL-DX
> contest, please note the
> > contest name may be different from what your contest
> program generates.
> > 
> > An example of correct format is at
> > 
> > http://drcg.de/index.php?option=com_content&task=view&id=25&Itemid=36
> > 
> > 
> > 
> > 73, Bill W6WRT
> > _______________________________________________
> > RTTY mailing list
> > RTTY at contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> > 
> > 
> 
> 
> ------------------------------
> 
> Message: 11
> Date: Sun, 05 Jul 2009 16:13:25 +0200
> From: Bernd DC3HB <dc3hb at freenet.de>
> Subject: [RTTY] DL-DX RTTY Contest - Logs
> To: RTTY at contesting.com
> Message-ID: <4A50B505.4060600 at freenet.de>
> Content-Type: text/plain; charset=ISO-8859-15
> 
> Hi folks,
> 
> the CATEGORY: and CALLSIGN: line are main important within
> the Cabrillo Log.
> 
> Example:
> 
> CATEGORY: C
> CALLSIGN: WF9XXX/6
> 
> If you have worked from an other area, please specify the
> callsign
> you've used.
> 
> In MIXW the CATEGORY is wrong. Please edit the cabrillo log
> with
> "notepad" and add in the CATEGORY: line a space and the
> letter of your
> chosen category.
> 
> Example:
> 
> CATEGORY: SOAB LOW RTTY    (original)
> CATEGORY: SOAB LOW RTTY C  (edited)
> 
> Please look at http://www.drcg.de and check if your log is received
> and
> if your category is correct.
> 
> If the category is shown as "U" (unknown), please edit like
> described
> the CATEGORY: line and resend the log to "logs at drcg.de"
> 
> Alternatively, you can specify the category in the subject
> line.
> 
> Example: WF9XXX C
> 
> You can contact me directly per mail, if there is still
> anything wrong.
> 
> CATEGORY: A     SO1R AB(all bands)
> CATEGORY: B     SO1R AB 6 hours
> CATEGORY: C     SO1R AB limited
> antennas
> CATEGORY: D     SO1R AB 6h limited
> antennas
> CATEGORY: E     MO1R AB
> CATEGORY: F     SO2R AB (no limit)
> CATEGORY: G     MO2R AB (no limit)
> 
> SO1R Single Operator one Radio
> MO1R Multi Operator one Radio
> SO2R Single Operator two Radios (or more)
> MO2R Multi Operator two Radios (or more)
> 
> 73 Bernd, DC3HB
> DL-DX RTTY Contest Manager
> 
> 
> ------------------------------
> 
> Message: 12
> Date: Sun, 5 Jul 2009 10:43:09 -0400
> From: Andrei Stchislenok <asnp3d at gmail.com>
> Subject: Re: [RTTY] DL-DX RTTY Contest - Logs
> To: Bernd DC3HB <dc3hb at freenet.de>
> Cc: RTTY at contesting.com
> Message-ID:
>     <a765bab60907050743m1c294cbdj89834ceb6d2a3830 at mail.gmail.com>
> Content-Type: text/plain; charset=ISO-8859-1
> 
> This works, Bernd and All:
> 
> I put in the Subject Line NP3D/W2 D
> 
> and CATEGORY: D ALL HIGH RTTY (in Cabrillo file)
> 
> And I removed all other CATEGORIES in Cabrillo file,
> generated by Writelog;
> they are not neccessary.
> 
> Fine business!
> 
> 
> 2009/7/5, Bernd DC3HB <dc3hb at freenet.de>:
> >
> > Hi folks,
> >
> > the CATEGORY: and CALLSIGN: line are main important
> within the Cabrillo
> > Log.
> >
> > Example:
> >
> > CATEGORY: C
> > CALLSIGN: WF9XXX/6
> >
> > If you have worked from an other area, please specify
> the callsign
> > you've used.
> >
> > In MIXW the CATEGORY is wrong. Please edit the
> cabrillo log with
> > "notepad" and add in the CATEGORY: line a space and
> the letter of your
> > chosen category.
> >
> > Example:
> >
> > CATEGORY: SOAB LOW RTTY    (original)
> > CATEGORY: SOAB LOW RTTY C  (edited)
> >
> > Please look at http://www.drcg.de and check if your log
> is received and
> > if your category is correct.
> >
> > If the category is shown as "U" (unknown), please edit
> like described
> > the CATEGORY: line and resend the log to "logs at
> drcg.de"
> >
> > Alternatively, you can specify the category in the
> subject line.
> >
> > Example: WF9XXX C
> >
> > You can contact me directly per mail, if there is
> still anything wrong.
> >
> > CATEGORY: A     SO1R AB(all
> bands)
> > CATEGORY: B     SO1R AB 6 hours
> > CATEGORY: C     SO1R AB limited
> antennas
> > CATEGORY: D     SO1R AB 6h limited
> antennas
> > CATEGORY: E     MO1R AB
> > CATEGORY: F     SO2R AB (no
> limit)
> > CATEGORY: G     MO2R AB (no
> limit)
> >
> > SO1R Single Operator one Radio
> > MO1R Multi Operator one Radio
> > SO2R Single Operator two Radios (or more)
> > MO2R Multi Operator two Radios (or more)
> >
> > 73 Bernd, DC3HB
> > DL-DX RTTY Contest Manager
> > _______________________________________________
> > RTTY mailing list
> > RTTY at contesting.com
> > http://lists.contesting.com/mailman/listinfo/rtty
> >
> 
> 
> 
> -- 
> 73's Andrei
> EW1AR-NP3D
> ----------------------------------------------------
> DXCC RTTY via LoTW only
> Who has what? - World Wide Rating
> Please visit: www.k4fo.com/cqrtty/
> 
> 
> ------------------------------
> 
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
> 
> 
> End of RTTY Digest, Vol 79, Issue 5
> ***********************************
> 


More information about the RTTY mailing list