[RTTY] Help needed w/Win 7/Vista + DXPWIN (DXP38 software)

[Chuck Schertle]

Hi Don

I had the same problem trying to run N1MM from my Vista Computer. Here is what I did...

After the program is loaded, right click on the icon for the program and look at the properties. From there, go to the compatibility tab within the properties for that program and select having the program run within a level of compatibility. I just checked and there is a compatibility level that goes all the way back to Windows 95.

BTW... Great job on the RU and Congrats on the award.

73
Chuck Schertle
N3WZR



________________________________
From: Don Hill AA5AU <aa5au at bellsouth.net>
To: RTTY Reflector <rtty at contesting.com>
Sent: Tue, January 5, 2010 8:03:19 PM
Subject: [RTTY] Help needed w/Win 7/Vista + DXPWIN (DXP38 software)

I'm trying to help a friend who was running a DXP38 with DXPWIN.  After a lightning strike, he replaced his damaged computers - one
with Vista and the other with Windows 7.  He tried loading DXPWIN on the new computers but it is getting an error message that says
something like:

"The program will not work with this version of window..  You need x86(32 bit) or x64(64bit) for it to be compatible."

In the meantime, I suggested he try to go to MMTTY or to try to use N1MM with the DXP38.

Any help on this would be appreciated.  I have DXPWIN and a DXP38 which works fine on my XP machine but I do not have a Vista or
Windows 7 machine to try to make this work (if it's possible).

Thanks!

...

73, Don AA5AU
http://www.aa5au.com
http://www.rttycontesting.com 

_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty