[RTTY] Multiple Decoders

[Dick Flanagan]

Yup.  My only complication is I am using a microHAM Digi Keyer II for my 
primary Tx/Rx control and they don't make access to the audio line-out 
very easy, but it eventually finds its way to the computer sound card 
where I should be able to route it to the DXP38.  Heck, if I have to 
I'll grab it off the speaker connector (very last resort).

All in all, the more I think about it, the more do'able it seems.  We 
shall see.  Thanks to everyone for their help and suggestions.

Dick
--
Dick Flanagan K7VC
dick at k7vc.com

On 2/1/2012 12:30 AM, Ed Muns wrote:
>
> Use a generic Y-adapter to feed the receiver audio into the soundcard LINE
> IN input for MMTTY and the DXP38 (or other hardware modem) audio input jack.
>
> Ed - W0YK
>
> Dick, K7VC, wrote:
>> I, too, have run multiple instances of MMTTY, but I'm curious how to run
>> MMTTY simultaneously with a hardware decoder like the DXP38 from the
>> same radio....
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
>
>