[RTTY] Multiple Decoders

[Ed Muns]

Many of us have been doing multiple decoders for years now, particularly the
DXP38 plus multiple instances of MMTTY with different profiles.  Just put a
Y-adapter your radio's audio output and feed one leg to the DXP38 and the
other to your soundcard or microHAM box.  You only use one channel, not
both, because you want all decoders seeing the same audio stream or
receiver.

Ed - W0YK

Dick, K7VC, wrote:
> Yup.  My only complication is I am using a microHAM Digi Keyer II for my
> primary Tx/Rx control and they don't make access to the audio line-out
> very easy, but it eventually finds its way to the computer sound card
> where I should be able to route it to the DXP38.  Heck, if I have to
> I'll grab it off the speaker connector (very last resort).
> 
> All in all, the more I think about it, the more do'able it seems.  We
> shall see.  Thanks to everyone for their help and suggestions.