[RTTY] Multiple Decoders

[Dick Flanagan]

Hi, Holger.

I want to thank you and everyone else who has contributed to this topic. 
  Your configuration is very similar to mine.

Do you use audio directly from your ICOM speaker output or do you put it 
in parallel with the audio output from the ACC connector on the back of 
the radio?  The microHAM radio connector is a potted plug and I'm just 
wondering where you tap into the audio with your Y-connector?

Thanks again to everyone for their help.

Dick
--
Dick Flanagan K7VC
dick at k7vc.com

On 2/1/2012 9:21 AM, Holger Gatternig wrote:
>
>
> Hello to the group,
>
> i am using a DXP-38 as a additional decoder.  The setup consist of a
> 756pro3 with Digikeyer2
> and a K3 with a Digikeyer. The easies way to do this is a simple Y cable.
> For the K3 you can use a simple stereo audio Y cable connected direct to
> the radio.
> For the pro3 i soldered  an Y adapter to connect the DXP-38 to the audio
> out from my rig.
> The only reason i stopped using the dxp as a decoder is the software
> from HAL.
> Every few secounds i hear a "pling" from the pc speaker. This is really
> annoying.
> Does anyone know a software for the DXP-38 without this annoying sounds?
>
> MixW is my main programm for RTTY (only FSK), but i use always more than
> one decoder.
> Most of the time i use MMTTY and/or Airlinkexpress (excellent decoder!)
> as a additional RTTY decoder.
> The built in decoder from my pro3 is also always on witch is one of the
> best RTTY decoders i know.
>
>
> vy 73 de Holger, OE9GHV
>
>
>
> Am 01.02.2012 05:34, schrieb Dick Flanagan:
>> I know some folks run multiple RTTY decoders, with one of them often
>> being MMTTY and the other a DXP38.  Is it possible to run these two
>> decoders with one radio or is SO2R necessary?
>>
>> Dick
>> --
>> Dick Flanagan K7VC
>> dick at k7vc.com
>>
>> On 1/31/2012 8:15 PM, Joe Subich, W4TV wrote:
>>>
>>>
>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>
>
>
>
>