[RTTY] Multiple Decoders

[Holger Gatternig]

Hello Dick,

i use the line out from the ACC connector. Here is a picture from the 
cable i soldered
special for the DXP38.

https://plus.google.com/photos/115226722017066959959/albums/5704232608438962305/5704232643615426674


vy 73 de Holger, OE9GHV


Am 01.02.2012 18:40, schrieb Dick Flanagan:
> Hi, Holger.
>
> I want to thank you and everyone else who has contributed to this topic.
>    Your configuration is very similar to mine.
>
> Do you use audio directly from your ICOM speaker output or do you put it
> in parallel with the audio output from the ACC connector on the back of
> the radio?  The microHAM radio connector is a potted plug and I'm just
> wondering where you tap into the audio with your Y-connector?
>
> Thanks again to everyone for their help.
>
> Dick
> --
> Dick Flanagan K7VC
> dick at k7vc.com
>
> On 2/1/2012 9:21 AM, Holger Gatternig wrote:
>>
>> Hello to the group,
>>
>> i am using a DXP-38 as a additional decoder.  The setup consist of a
>> 756pro3 with Digikeyer2
>> and a K3 with a Digikeyer. The easies way to do this is a simple Y cable.
>> For the K3 you can use a simple stereo audio Y cable connected direct to
>> the radio.
>> For the pro3 i soldered  an Y adapter to connect the DXP-38 to the audio
>> out from my rig.
>> The only reason i stopped using the dxp as a decoder is the software
>> from HAL.
>> Every few secounds i hear a "pling" from the pc speaker. This is really
>> annoying.
>> Does anyone know a software for the DXP-38 without this annoying sounds?
>>
>> MixW is my main programm for RTTY (only FSK), but i use always more than
>> one decoder.
>> Most of the time i use MMTTY and/or Airlinkexpress (excellent decoder!)
>> as a additional RTTY decoder.
>> The built in decoder from my pro3 is also always on witch is one of the
>> best RTTY decoders i know.
>>
>>
>> vy 73 de Holger, OE9GHV
>>
>>
>>
>> Am 01.02.2012 05:34, schrieb Dick Flanagan:
>>> I know some folks run multiple RTTY decoders, with one of them often
>>> being MMTTY and the other a DXP38.  Is it possible to run these two
>>> decoders with one radio or is SO2R necessary?
>>>
>>> Dick
>>> --
>>> Dick Flanagan K7VC
>>> dick at k7vc.com
>>>
>>> On 1/31/2012 8:15 PM, Joe Subich, W4TV wrote:
>>>>
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
>>
>>
>>
>>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty