[RTTY] SO2R Problem

[Jerry Flanders]

I found much info about making stubs on the internet when I made mine 
years ago. I used RG-11, but anything would work, probably even RG6 
TV coax. Impedance would not be important. My MFJ 259B antenna 
analyzer was helpful, but I think I could have done without it.

Once made, a simple "T" connector on the back of the amp connects 
stub and antenna to amp.

Jerry W4UK

At 03:59 PM 2/14/2012, James C. Hall, MD wrote:
>I'm thinking about adding stubs to my SO2R setup. I use the TXBPF filters
>and they work great, but I was crawling way up the band on 20M and also
>looking at 40M, and I could see myself on the P3 panadapter as I approached
>the harmonic. These are monobanders so adding stubs for each band would be a
>no-brainer. That should help the situation a bit more.
>
>Does everybody just make their own stubs ? I noticed Array Solutions makes
>'em. I do have a VNA I caould use for this but have never done it.
>
>73, Jamie
>WB4YDL