[RTTY] Hal ST 6000

[Jim W7RY]

OOPS!

I thought you had said ST-8000!  My mistake. Go with what Jay, WS7I was saying.... 

73
Jim W7RY



From: William Levy 
Sent: Friday, October 19, 2012 6:59 PM
To: Jim W7RY 
Subject: Re: [RTTY] Hal ST 6000

What do you mean Jim by the regen function? I am away from the shack for a few weeks and I am not up on that or how I do it? 

Can you please clarify?

Thanks, Bill



On Fri, Oct 19, 2012 at 6:04 PM, Jim W7RY <w7ry at centurytel.net> wrote:

  Here is what I do.

  Use the regen function. Receive on 45 baud Baudot. Then set the output to 1200 baud ASCII. Then take the output to a serial port to your logging program.

  You can use Procomm, Putty or any other terminal program.  With N1MM, I simply open another receive window, and set the port to a serial port on my windows 7 PC. I use an 8 port serial card installed into my machine. I use the
  same card, on a different port for FSK CW and rig control (for my 751A). I use USB for my IC7600 and IC-7200. They have built in sound cards but still need a serial port for FSK and CW.

  73
  Jim W7RY


  -----Original Message----- From: William Levy
  Sent: Friday, October 19, 2012 10:46 AM
  To: rtty at contesting.com
  Subject: [RTTY] Hal ST 6000

  Is anyone using a HAL ST 6000 with a modern computer to serial or USB ports? I would like to know what you did. I know about the pk232 trick but would like to find a way to go direct with the right USB serial or right serial card to run our slow baud rates

  Ryryr de N2WL

  William G Levy
  Mobile 1914.645.4771

  _______________________________________________
  RTTY mailing list
  RTTY at contesting.com
  http://lists.contesting.com/mailman/listinfo/rtty