[RTTY] Changing MMTTY to 75 baud for the BARTG 75 Sprint

[Bill Turner]

The BARTG 75 baud Sprint contest is tomorrow.

There are the four steps to change MMTTY to 75 baud:

I use FSK only, but I assume this applies to AFSK as well. If not, 
please let me know.

1. Start MMTTY and go to Options>Setup MMTTY and select the Demodulator tab.
2. At the bottom, UN-check the box that says "Fixes 45.45 baud".
3 Go to the Decode tab and change the baud rate to 75.
4. Click OK.  Do not skip this step or changes will not be saved.


This is a short contest - just four hours but lots of fun. Rules at:

http://bartg.rsgbcc.org/cgi-bin/hfreadcal.pl

See you there!

73, Bill W6WRT