[RTTY] Changing MMTTY to 75 baud for the BARTG 75 Sprint

[Don Hill AA5AU]

Information on running 75 baud with MMTTY, 2Tone and WriteLog here:

http://rttycontesting.com/75baudrtty/75baudrtty.html

73, Don AA5AU

-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of Bill Turner
Sent: Saturday, April 26, 2014 9:22 PM
To: RTTY group
Subject: [RTTY] Changing MMTTY to 75 baud for the BARTG 75 Sprint

The BARTG 75 baud Sprint contest is tomorrow.

There are the four steps to change MMTTY to 75 baud:

I use FSK only, but I assume this applies to AFSK as well. If not, please let me know.

1. Start MMTTY and go to Options>Setup MMTTY and select the Demodulator tab.
2. At the bottom, UN-check the box that says "Fixes 45.45 baud".
3 Go to the Decode tab and change the baud rate to 75.
4. Click OK.  Do not skip this step or changes will not be saved.


This is a short contest - just four hours but lots of fun. Rules at:

http://bartg.rsgbcc.org/cgi-bin/hfreadcal.pl

See you there!

73, Bill W6WRT


_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty