[RTTY] using fldigi with TS2000

[Eric Lowell]

Joe is right.

Pin 9 mutes the front panel mic hi input.

Feed the audio in pin 11, put the radio in LSB, ground pin 9 and you 
ought to get power out.

Why switch to AFSK if FSK was working?

GL de W1EL

On 1/29/2014 8:15 PM, Lee wrote:
> Actually, this wouldn't be specific to fldigi since it's a general issue for
> AFSK.
>
> Anyway, I was using pin 9 with FSK and N1MM and that was working. For AFSK, it
> is my understanding that pin 9 will mute the microphone input on pin 11.
> According to the TS2000 manual, I need to key the radio with pin 13 so that
> pin 11 isn't muted on key down.
>
> I've tried both pin 9 and pin 13 with the same result (no AFSK transmitted).
>
> Joe Subich, W4TV <lists at subich.com> wrote ..
>> This should really be asked on the fldigi support forum ...
>>
>> TS-2000 requires PTT on pin 9 (PKS) when applying audio on pin 11 (PKD).
>> See the description of those pins on page 94 of the TS-2000 Instruction
>> Manual.
>>
>> 73,
>>
>>      ... Joe, W4TV
>>
>>
>> On 1/28/2014 9:57 PM, Lee wrote:
>>> I believe that I have my PC-to-radio interface cable set up right but I
> can't
>>> seem to transmit any audio. The radio is keyed but no transmit audio. I
> have
>>> audio to ACC2-11 and my keying is on ACC2-13. I don't see any radio menu
>>> options that would cause an issue. Also, with the microphone attached, I
> can
>>> transmit voice when the PC keys the radio so the microphone audio from
> ACC2
>>> shouldn't be muted. Receive is working properly though. What am I missing?
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>

-- 
Eric Lowell
48 Loon Road
Wesley, ME 04686