[RTTY] TS-2000, RigBlaster Advantage, N1MM, MMTTY, and FSK

[Joe Subich, W4TV]

You may be able for find some suggestions in AA5AU's RTTY Contesting
web site - www.rttycontesting.com.  Otherwise, I suggest asking on
the N1MM Logger e-mail list on Yahoo and contacting West Mountain
Radio's support desk.

It would appear that your issue is in configuring the N1MM Digital
Interface for your Rigblaster Advantage - that falls directly in the
portfolio of West Mountain Radio support.

73,

    ... Joe, W4TV


On 3/2/2014 3:12 PM, David Tanks wrote:
> Hello gang. I have not been able to get the above combination to work on my Windows 7 desktop, no matter what I do. The only way it works is if I use an old XP machine and the W3YY interface.
>
> MMTTY works fine standalone( works in either FSK or LSB; should it?, if  MMTTY is set up for FSK? ). When I start N1MM and transmit, I only get a single constant tone.
>
> The radio's serial port is connected to the computer via a Belkin USB to serial adapter( Com 6 ). That apparently is working fine, as I can change frequency on the radio, and in N1MM the frequency follows it.
>
> The Advantage is on Com 5( a USB cable from the Advantage USB port to a USB jack on the computer ).
>
> I have the cable for the Advantage for CW/FSK to the ACC2 jack on the radio hooked up.
>
> Visits to the West Mountain Radio website and N1MM's website have not been productive in solving the problem.
>
>
> What am I missing? I would like to have this running all on the same computer and not have the Advantage doing only digital operations.
>
> There are so many variables in these programs that it only takes 1 to screw it all up; it can be very aggravating!
>
> Thanks in advance.
>
> 73, David AD4TJ
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>