[RTTY] MP issue

[Joe Subich, W4TV]

One other possibility ...

Make sure the AF Out plug on the microHAM cable is connected to the
AF Out jack on the rear of the FT-1000MP and not the speaker jack.
The speaker jack will mute when headphones are connected, AF Out
will not - the speaker jack is also controlled by the AF Gain
control, AF Out is a constant level regardless of AF Gain (volume)
setting.

73,

    ... Joe, W4TV


On 9/27/2015 7:50 AM, Joe Subich, W4TV wrote:
>
>  > Found no audio to MicroKeyer box on receive.
>
> Original microKEYER or microKEYER II?
>
> Check MMTTY's Soundcard tab and make sure you have selected "LINE"
> on the sound card connected to microKEYER or "Line (microHAM CODEC)"
> for microKEYER II.
>
>> found that I could decode if no headset plugged in. Plug in
>> headset...no decode.
>
> Symptoms indicate you are decoding the audio from your microphone
> (e.g. acoustic coupling from speaker to mic) which means the wrong
> sound card input is selected.
>
> 73,
>
>     ... Joe, W4TV
>
>
> On 9/27/2015 12:57 AM, Dick Wilson wrote:
>> My 'old' MP has antenna relay issues. I plugged in a replacement MP.
>> I thought I got everything installed as on the old one.
>> Found no audio to MicroKeyer box on receive. Radio has plenty of
>> audio. After plugging & unplugging, found that I could decode if no
>> headset plugged in. Plug in headset...no decode.
>> I can transmit RTTY. Hesitate to mess with Com-ports as it seems to
>> be more or less OK.
>> Found nothing in Yaesu or MicroKeyer manual. I know I am probably
>> overlooking a relatively simple solution. Can someone give me a hint
>> on where to look, please?
>>
>> TU & 73,
>>
>> Dick K6LRN
>> _______________________________________________
>> RTTY mailing list
>> RTTY at contesting.com
>> http://lists.contesting.com/mailman/listinfo/rtty
>>
> _______________________________________________
> RTTY mailing list
> RTTY at contesting.com
> http://lists.contesting.com/mailman/listinfo/rtty
>