[RTTY] SDRPlay with N1MM+

[Rick Ellison]

John.
This can't be done with N1MM. But you should checkout Waterfall Bandmap that
Steve n2IC has written. It's a program that uses the SDRPlay to create a
live waterfall bandmap. This works in conjunction with the main N1MM
program. I do not have the link for the program as I am not home today and
am traveling for a couple of days but you can ask for it on the main N1MM
group.

73 Rick N2AMG
-----Original Message-----
From: RTTY [mailto:rtty-bounces at contesting.com] On Behalf Of John Barber
Sent: Tuesday, February 7, 2017 12:23 PM
To: rtty at contesting.com
Subject: [RTTY] SDRPlay with N1MM+

Is it possible to use N1MM+ with a transceiver (TS590SG) and use an SDRPlay
as a second receiver? The SDR works fine from the 590 antenna loop-through
and talks to the 590 via Omnirig, but how can I get N1MM+ linked to the
TS590 with the SDR tracking the 590, then use the SDR to a digital
interface?

John  GW4SKA



---
This email has been checked for viruses by AVG.
http://www.avg.com
_______________________________________________
RTTY mailing list
RTTY at contesting.com
http://lists.contesting.com/mailman/listinfo/rtty