[SCCC] Configuring N1MM+ for CW Sprint

[Ryan Noguchi]

 Just allocate one function key message to the complete exchange (with calls in the correct positions) in each mode. If you have no slots free, you can do without CALL? in S&P mode or WA7BNM in Run mode since these fills are much less likely to be needed. 

73, Ryan AI6DO

    On Sunday, September 12, 2021, 09:50:39 AM PDT, Bruce Horn <bhorn at hornucopia.com> wrote:  
 
 Hi,

I haven't participated in the CW Sprint in a very long time, but thought I would do so for the first hour or so yesterday. I had hoped that using the "ESM" mode in N1MM+ would result in easily producing the correct order for the QSO elements. However, that was not the case. So after fiddling with N1MM+ for a bit, I decided that my return to the CW Sprint would need to wait for another day.

So, my question is: How to configure N1MM+ for a SO1R CW Sprint so that I don't have to click on three different function keys and the CQ/S&P toggle constantly to handle the hiscall-mycall-exchange and hiscall-exchange-mycall versions of the exchanges?

Thanks for your help.

73 de Bruce, WA7BNM  (bhorn at hornucopia.com)
_______________________________________________
SCCC mailing list
SCCC at contesting.com
http://lists.contesting.com/mailman/listinfo/sccc