[SCCC] Configuring N1MM+ for CW Sprint

David Hachadorian k6ll.dave at gmail.com
Sun Sep 12 14:09:13 EDT 2021


Hi Bruce,

Here are my function key messages for the CW Sprint.

F1 CQ,CQCQna~*{CLEARRIT}
F2 EXCH,* # DAVE~AZ
F3 TU,ee{CLEARRIT}{LOG}
F4 MYCALL,*
F5 HISCALL,!
F6 FAST CQ,* * NA{RUN}{CLEARRIT}
F7 ?,?
F8 NR?,NR?
F9 NAME?,NAME?
F10 NR,NR#
F11 DAVE,DAVE~DAVE
F12 AZ,AZ~AZ
F1 S&&P CQ,cqcqna~*{clearrit}
F2 S&&P EXCH,! # dave~az~*{run}
F3 S&&P TU,ee{CLEARRIT}{LOG}
F4 S&&P MYCALL,*
F5 S&&P HISCALL,!
F6 FAST CQ,na`*{RUN}{CLEARRIT}
F7 S&&P ?,?
F8 NR?,NR?
F9 NAME?,NAME?
F10 NR,NR#
F11 DAVE,dave~dave
F12 AZ,az~az

If you look at S&P msg F2, there is a switch to RUN mode after you send 
the S&P exchange.  The setup depends on N1MM to switch from RUN to S&P 
mode when you turn the VFO dial.

Dave Hachadorian, K6LL
Big Bear



On 9/12/2021 9:50 AM, Bruce Horn wrote:
> Hi,
>
> I haven't participated in the CW Sprint in a very long time, but thought I would do so for the first hour or so yesterday. I had hoped that using the "ESM" mode in N1MM+ would result in easily producing the correct order for the QSO elements. However, that was not the case. So after fiddling with N1MM+ for a bit, I decided that my return to the CW Sprint would need to wait for another day.
>
> So, my question is: How to configure N1MM+ for a SO1R CW Sprint so that I don't have to click on three different function keys and the CQ/S&P toggle constantly to handle the hiscall-mycall-exchange and hiscall-exchange-mycall versions of the exchanges?
>
> Thanks for your help.
>
> 73 de Bruce, WA7BNM   (bhorn at hornucopia.com)
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc
> .



More information about the SCCC mailing list