[SCCC] Voice keying audio files from PC with N1MM+ into FT-1000

[Bill Haddon]

Bob,
Re voice keyer:  I'm forwarding n0KQ's comments:  [you can reach Bill
at William
Spickler <williamspickler at gmail.com>]

"I am using the DVK in N1MM driving a Yaesu FT 1000 mp mkV. It works
although the audio quality is rough.  N1MM is running on a Windows 10
computer which is interfaced to the radio with a micro KEYER II interface.
The audio path is setup in the microKEYER II software on the audio tab.

The wave files are pre-recorded with Audacity to record and edit. I try to
get the  maximum gain in the audio in Audacity and save the *.wav file in
the N1MM wav file folder  (Admin\Documents\N1MM Logger+\WAV\{Operator}\
MyCall)  etc. Then, when you push the function key (F4)  N1MM calls up the
wav file and plays it through the microKEYER to the radio.

That's a quick review of what I have. The  key to all this  is getting the
interface setup correctly.  Best of luck, it will save your voice in an SSB
contest.

Billl, N0KQ"


On Wed, Mar 29, 2023 at 2:41 PM Bob Grubic <bobgrubic at gmail.com> wrote:

> Hi  guys,
> .
> I'm interested in setting up N1MM+ to work with my Yaesu FT-1000 and use
> the voice keyer function of N1MM+ to play wav files from my PC (and later
> to use the IC-7300 to do the same). (I'm not interested in using the
> built-in voice keyer capability of the IC-7300.) My question is how can I
> get the audio from my PC into the FT-1000? Has anyone done this before? Am
> I left with only a homebrew method--making a break-out box for the PC audio
> output and the mic input of the radio? (which I'd rather not have to do) Is
> there any commercially made device that will allow me to plug in cables for
> the same result? Thanks.
> .
> 73,
> Bob NC6Q
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc
>