[SCCC] Computer Audio and the Icom 7610

[Bruce Horn]

Thanks Ryan. The USB audio from the computer is set to 100%. I run WSJT-X on the same computer.

73 de Bruce, WA7BNM   (bhorn at hornucopia.com)

----- Original Message -----
From: "Ryan Huggins" <KI6BTY at pm.me>
To: "Bruce Horn" <bhorn at hornucopia.com>
Cc: "SCCC Reflector" <sccc at contesting.com>
Sent: Sunday, October 29, 2023 10:16:35 PM
Subject: Re: [SCCC] Computer Audio and the Icom 7610

I do not have this experience, but as a computer geek I'd expect the adjustments would need to be made on the computer's sound output levels.  This is similar, in my mind, to how FT8 operates.  The output volume is driven by the computer's output sound levels.


-73
Ryan, KI6BTY


------- Original Message -------
On Sunday, October 29th, 2023 at 8:48 PM, Bruce Horn <bhorn at hornucopia.com> wrote:


> Hi,
> 
> Does anyone have any experience adjusting the audio levels when interfacing computer audio with the Icom 7610? I've created audio files that were recorded at the appropriate level, but when played through the N1MM+ interface with the 7610, the level is significantly less than the audio from a microphone. I tried adjusting the various MOD level settings on the 7610, but varying them from 10% to 90% had no affect on the audio level. Any help would be appreciated. Thanks.
> 
> 73 de Bruce, WA7BNM (bhorn at hornucopia.com)
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc