[SCCC] N1MM questions for SS CW
Clayton Nall
clayton.nall at gmail.com
Sun Nov 3 15:32:33 EST 2024
Thanks to all for the answers. I've gotten it working.
If any TS590SG users are out there to give tips on how to configure N1MM,
please let me know.
On Sun, Nov 3, 2024 at 12:02 PM Steve Harrison <k0xp at k0xp.com> wrote:
> Look for the instructions for the ARRL November Sweepstakes CW (or SSB)
> here:
>
>
> https://n1mmwp.hamdocs.com/manual-supported/contests-setup/setup-hf-contests/#SSCW
>
> Make sure the original station info is filled out properly: go back to
> "Open log in database xxxxxx" under "FILES" tab and check the info is
> correct.
>
> Steve, K0XP
>
>
> On 11/3/2024 11:38 AM, Dennis Younker NE6I wrote:
> > Clayton,
> >
> > You could try this instead:
> >
> > # A NF1R 72 XXX
> >
> > Change 72 to your year first licensed and change the XXX to your ARRL
> > section. (Not sure why # is not sending the QSO number though. It should.
> >
> > 73, Dennis NE6I
> >
> > -----Original Message-----
> > From: SCCC<sccc-bounces at contesting.com> On Behalf Of Clayton Nall
> > Sent: Sunday, November 3, 2024 7:11 AM
> > To:sccc at contesting.com
> > Subject: [SCCC] N1MM questions for SS CW
> >
> > Hi all,
> > I have a few questions about setting up N1MM for the SS CW. I spent two
> > hours yesterday afternoon following advice on online forums setting up my
> > TS590SG for the contest and getting about 60% of the way there.
> >
> > 1) I have my winkey set up and working but it is not sending {EXCH}
> > correctly. Instead of # Q AA6FD 16 SB it just sends Q 16 SB. I appear
> to
> > have everything set up just like in the examples. Any tricks to getting
> it
> > to send the full exchange correctly?
> >
> > 2) I have gotten the rig hooked up on my USB COM4 port. When it is
> working
> > at 9600 baud, I can control the rig's frequency but I am not reading the
> > frequency from the rig. The COM4 connection also drops out after a few
> > seconds of transmitting--I don't think it's RFI driven because I dialed
> my
> > power down to QRP class and the problem persists.
> >
> > Thanks for your help. I'd love to hand out a few more QSOs from the SB
> > section before the weekend is out!
> >
> > 73
> > NF1R
> > --
> > Clayton Nall
> > http://www.nallresearch.com
> > Cell: (617) 850-2062
> >
> > <
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai
> > gn=sig-email&utm_content=webmail>
> > Virus-free.www.avast.com
> > <
> https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campai
> > gn=sig-email&utm_content=webmail>
> > <#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
> > _______________________________________________
> > SCCC mailing list
> > SCCC at contesting.com
> > http://lists.contesting.com/mailman/listinfo/sccc
> >
> >
> > _______________________________________________
> > SCCC mailing list
> > SCCC at contesting.com
> > http://lists.contesting.com/mailman/listinfo/sccc
> --
> See my QRZ.com page at *https://www.qrz.com/db/K0XP*
> _______________________________________________
> SCCC mailing list
> SCCC at contesting.com
> http://lists.contesting.com/mailman/listinfo/sccc
>
--
Clayton Nall
http://www.nallresearch.com
Cell: (617) 850-2062
More information about the SCCC
mailing list