[SD-User] SDI

Jim Martin Jim Martin" <MM0BQI@theRSGB.net
Wed, 31 Jul 2002 08:23:38 +0100


Hi Paul
Try this sequence, if it does not cause a problem I will zip up my .all and
send it to you.
mode is ssb
enter  F4E  as a callsign
space to serial number
enter   1
space to IOTA field,   EU is already in the field
enter  E and  enter to log contact
the prog freezes and PC beeps ( to make the program error only the three
letters EUE should be in the IOTA ref field)
Fails every time here with my contest log and various test logs set up
before the contest.
Most call combinations work fine and tell you to fix the IOTA ref
I am using the latest SDI with the fix for the Q command
Jim

Just rushing out to work but I think the peroblem is entering the letter E
in the IOTA field.  Fails with lots of calls signs at this end.


----- Original Message -----
From: "Paul O'Kane" <paul@ei5di.com>
To: <sd-user@contesting.com>
Sent: Wednesday, July 31, 2002 12:22 AM
Subject: Re: [SD-User] SDI


> Jim MM0BQI said:
>
> > I encountered only one minor problem which was when
> > I entered an invalid IOTA Ref. Under certain conditions
> > the program locked up, the PC beeped and everything had
> > to be switched off and on.
>
> > This example fails all the time on both my PCs
> > call F4E serial1 Ref EUE
>
> Sorry, but I can't reproduce this problem - I don't know why.  We
> used SDI at EJ4F (yes SDI CAN be used for multi-op) and it didn't
> crash or lock-up at any time.
>
> If anyone can reliably make SDI freeze, please let me have a copy
> of your .ALL fie and the EXACT key sequence that does the trick!
>
> Fraser G4BJM asked:
>
> > would it be possible to have SD modify the sdconfig.txt
> > file on the fly?
>
> It should be possible - I'll check it out.  If so, I'd have to do
> it after every change that would affect sdconfig.txt.  In the
> meantime, there are two options that will work. They are
> 1. leave the program after updating any of the keyer memories
> 2. edit sdconfig.txt directly  (this is safe - SD will ignore any
> parameters it doesn't recognise).
>
> 73,
> Paul EI5DI
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>