[SD-User] Re: SD-User Digest, Vol 20, Issue 5

[Manfred Ockert]

> _____________________________________________
> 
> SD setup.
> 
> Select Type 4 - General, Area Multipliers.
> 
> Multipliers Count:      B  (by band)
> Points per CW QSO:      1
> Points per SSB QSO:     1
> Pts/Bonus:              0  (multipliers)
> Name of .MLT file:      EUHFC
> Receive serials?        N
> Mode:                   SSB or CW
> Mixed-Mode Contest?     Y or N  (your choice)
> 
> If Mixed:
> Mults count both modes? N
> Work same station
>         on both modes?  Y
> ________________________________________________
> 
> Work Europeans only (there are no country multipliers) on all
> 6 bands from 160 to 10 metres. 
> 
> Exchange:
>   RS(T) + 2 digit number representing the year you (the
>   operator) personally received your first official amateur
>   licence.  Do NOT give the year the call you are using was
>   first issued, if different.
>   
>   Each different year received counts once as a multiplier
>   on each band, regardless of mode.
> 
> Note that you are asked, if possible, to record the exact
> operating frequency for each QSO.  If you use SD with rig
> control enabled, this will be done automatically.
> 
> For single-mode entries, you're allowed a maximum of 10 band
> changes per full clock hour (for example 12:00 to 12:59 UTC).
> For mixed-mode, you can have a maximum of 10 band and/or mode
> changes per full clock hour (for example, 3 mode changes and
> 7 band changes).
> 
> DX cluster or spotting nets are not permitted in any category.
> 
> After the contest, use SDCHECK to create your .LOG in Cabrillo
> format.  Rename it to YOURCALL.LOG, where YOURCALL is the
> callsign you used, and send it as an attached file to
> euhfc at hamradio.si.
> 
> 73,
> Paul EI5DI
> www.ei5di.com
> 

Paul - why SD is counting during the contest 101 Multi's??

(worked 11 need 90)
list starting 00 01 02 .... ending 98..99.. 00 !

== two times given ...hmmm not real error ...
only a "good to know"


73
Fred
dl5ym