[SD-User] No rig control

[Darren G0TSM]

I have the ports setup ok in the config.txt file.
In my machine I have 5 com ports but SDWin's keyer works fine on either com 
1, 3 or 4. (Com 2 doesnt exist on my machine, in SDWin com 5 is an LPT port 
and my com 6 isnt supported).
I also have installed Logger32 and Writelog, both of these programs see the 
rig on any of my 5 com ports.
One thing that I did notice was that where you add in the name of the radio 
file in the port setup FT1000MP if you leave it blank and hit enter then 
you get a list of all the .SD radio control files, well I presume you 
supposed to as all I have listed is OMNI6P.SD. The FT1000MP file is 
definately in the SDwin directory, unless I should have just called the 
directory/folder just plain SD.

Regards, Darren




At 09:52 11/01/2004, you wrote:
>I think you need to run the PORTS command when in the contest screen. Then
>you get options for CW & rig control. Mine is set like this :
>Radio 1 CW Port = 2
>Radio 2 CW Port = 0
>Radio 1 Control Port = 1
>Radio 2 Control Port = 0
>Kenwood
>Cheerio from John / G0RDO
>www.morsemad.com
>john at morsemad.com
>----- Original Message -----
>
>----- Original Message -----
>From: "Darren G0TSM" <sd at g0tsm.com>
>To: <sd-user at contesting.com>
>Sent: Saturday, January 10, 2004 10:57 PM
>Subject: [SD-User] No rig control
>
>
> > Hi All,
> > Just thought I have a bash in the new UK contest, besides only getting one
> > call in an hour I have this little problem.
> > I can't get SDWin to communicate with my rig. I'm using WinXP-Pro on an
> > Athlon XP2400 PC, SDWin 10.10 and an FT1000MP
> > on Com1. This works fine with Logger32 but even if I reboot the machine
>and
> > run SDWin it still doesnt see the radio.
> > I'm using the right file and as far as I can see it should work.
> >
> > Any tips for me?.
> >
> > Regards, Darren G0TSM
> >
> > _______________________________________________
> > SD-User mailing list
> > SD-User at contesting.com
> > http://lists.contesting.com/mailman/listinfo/sd-user
> >
> >