[SD-User] SD-User Digest, Vol 54, Issue 8

Fred Ockert m.ockert at bss-services.de
Thu Jun 14 02:03:40 EDT 2007


> Message: 2
> Date: Tue, 12 Jun 2007 22:06:57 +0100
> From: "Paul O'Kane" <pokane at ei5di.com>
> Subject: Re: [SD-User] Mode-changes
> To: <sd-user at contesting.com>
> Message-ID: <000601c7ad35$a2448560$0201a8c0 at paul>
> Content-Type: text/plain; format=flowed; charset="Windows-1252";
> 	reply-type=original
> 
> ----- Original Message ----- 
> From: "Fred Ockert" <m.ockert at bss-services.de>
> 
>> found with SD 13.23  changed Radiodefinitions.
> 
> Yes - that was intended.  In V13.22 an extra line
> was added.  At present it has no effect.
> _________________________________________________
> 
> Rig Control Files *.SD:
>     Added a record to all .SD files in preparation
>     for the implementation of Frequency Set
>     parameters - they're hard-coded at present.
> __________________________________________________
> 
> V13.23 is working here with an Icom Pro3.
> 
> With the exception of the control files for the IC728
> and the IC735, all the Icom files have exactly the
> same parameters - apart from the rig "address"
> parameter.  In effect, there are only 2 different
> Icom control files.
>  
>> still without IC737 ... well: tried IC738,IC746
>> and IC736 -> modified to correct Radioadress  3CH
> 
> ... Frequency ist working
>> but mode-change  does not work  (older versions did so)!
> 
> Mode change works in V13.23 - but only for a mixed-mode
> contest.  SD will not change to SSB in a CW-only contest
> and vice-versa.
> 
>> if you try  on SD: SSB -> nothing happens
> 
> SD follows the mode on the rig, but only if the mode
> is valid for the contest being logged.
> 
> It's not possible to change the rig's mode from SD.
> 
>> if you switch the Radio to SSB -> nothinh on PC
> 
> The mode will change to SSB if you're logging an SSB
> contest.  SDX permits both CW and SSB in all logs,
> please test this with SDX.
> 
>> also TRX= 14010/cw ... typing 40S   ...the TRX
>> changes to 40m/CW
> 
> Please try this again.  With V13.23 here, the
> command 40S has no effect (it does nothing).  It
> does not make the rig change band to 40m - from
> 20m or from any other band.
> 

Additional: conbtest ,user was type 11 - general without Multipieres and  mixed MODE = yes
Paul. I would never have asked for a single mode contest...

next rig-examiniation on comming weekend...

Fred
dl5ym





More information about the SD-User mailing list