[SD-User] laptop to ic756pro3 connections

[Gwyn Williams]

Andy,

You will be there on Saturday when I connect everything together for NFD, the setup is the same as you have, i.e. a Laptop with an IC756 Pro III. Everything is simple but you need everying in the right place at the right time.....

Cheers,
Gwyn - G4FKH




________________________________
From: andrew kersey <goibn at kersey1.freeserve.co.uk>
To: SD-USER <sd-user at contesting.com>
Cc: gwyn g4fkh <g4fkh at btinternet.com>; nic hickson <m0nrh at hf-radio.com>
Sent: Thursday, 4 June, 2009 3:40:05 PM
Subject: laptop to ic756pro3 connections

HP laptop to IC756pro3 - via RIGtalk.

Stereo lead is from the RIGtalk, which is plugged into the USB, to mono connector

to CLV remote connection at the rear of the IC756pro3.

I have managed to get the frequency to change on SD.

Now I am trying to get the laptop to key the transmitter.

When I press F1, SD says it is keying, but it doesnt key.

Do I need another lead from the laptop, to the key input at the

rear of the tranmsitter or should RIGtalk CAT CIV interface do it?

All help gratefully received.