[SD-User] WAE CW Contest

[Paul O'Kane]

The Worked All Europe DX Contest takes place from 00:00
UTC on Saturday 13th to 23:59 UTC on Sunday 14th August.
It is CW-only on the 5 contest bands from 10 - 80m, with
LP (100w) and HP sections for SO.

Rules at www.darc.de/referate/dx/contest/waedc/en/rules/

SD V15.49 supprts this event - www.ei5di.com

     Select the "WAE" template
     Mode - CW

Europeans work non-Europeans and vice-versa. SD displays
inappropriate callsigns or prefixes in red.  If they're
not red, they're OK to work for points.

Your score shown, while logging, reflects the correct
weighting for multipliers on each band.

SD supports QTCs for both sides of this contest. To see
how it all works, try a WAE test file, log a few QSOs
and then enter the QTC command in the callsign field.

You have to log the Time, Callsign and Serial for each
QTC.  The easiest way to do this is to type it all in
one field with no spaces - and Enter when you've
finished.

If you receive a QTC as 0905 9A1AA 015, type it as
09059A1AA15, followed by Enter.  This is faster and
simpler than entering the fields separately, but you
can still do it that way if you prefer.  At any time,
if you make a mistake, you can use the arrow keys and
Tab to make corrections.

If you're not familiar with logging QTCs, don't try to
do it for the first time on-air.  It is harder than
you might think, especially when you have to edit
something.

You can log up to 10 QTCs from each DX station - but they
don't have to logged all at once.  As you type callsigns
on the logging line, SD shows how many QTCs you have
left to log from (or send to) that station.  Each QSO and
each QTC scores 1 point, and it makes sense to ask for
QTCs as they make a huge difference to your score.

Use SDCHECK to create your Cabrillo .LOG file - your QTC
records (if any) are included at the end of your QSO
records.  Upload your log at http://www.waedc.de.

Please mention SD in your Cabrillo soapbox comments.

73,
Paul EI5DI