[SD-User] SD-User Digest, Vol 104, Issue 14

[Roger Dixon]

Hi Mike
If you want to run a number of different applications into the K3 I would
suggest using LP-Bridge.  I typically have SD, Logger32, MixW and
(Shock-horror) N1MM all "sharing" the K3.

CU
Roger - G4BVY   

-----Original Message-----
From: sd-user-bounces at contesting.com [mailto:sd-user-bounces at contesting.com]
On Behalf Of sd-user-request at contesting.com
Sent: 29 August 2011 20:00
To: sd-user at contesting.com
Subject: SD-User Digest, Vol 104, Issue 14

Send SD-User mailing list submissions to
	sd-user at contesting.com

To subscribe or unsubscribe via the World Wide Web, visit
	http://lists.contesting.com/mailman/listinfo/sd-user
or, via email, send a message with subject or body 'help' to
	sd-user-request at contesting.com

You can reach the person managing the list at
	sd-user-owner at contesting.com

When replying, please edit your Subject line so it is more specific than
"Re: Contents of SD-User digest..."


Today's Topics:

   1. Comm Port (Mike Harris)


----------------------------------------------------------------------

Message: 1
Date: Sun, 28 Aug 2011 17:59:38 -0300
From: Mike Harris <mike.harris at cwimail.fk>
Subject: [SD-User] Comm Port
To: sd-user at contesting.com
Message-ID: <4E5AAC3A.7090402 at cwimail.fk>
Content-Type: text/plain; charset=ISO-8859-1; format=flowed

G'day,

I decided to try out the K3 without any external interface for CW.  The
K3 has built in level converters for the RTS and DTR signals so a simple
RS232 cable will do the trick.  These signals can be assigned to PTT and
Key.

I first set up Logger32 and the CW machine plays OK.

When I try to set up SD to share a common port (4), first setting Com 4 as
CW port followed by Com 4 as rig control I get the following:

"Com 4 is shared as a CW port", followed a few seconds later by:
"Com 4 doesn't exist or is busy".

Com 4 works perfectly OK as a rig control port if I don't set a CW port.

Com 4 works perfectly OK as a CW port if I don't set a rig control port.

Running Win7 Pro 64 bit with a real RS232 two port card.

Regards,

Mike VP8NO






------------------------------

_______________________________________________
SD-User mailing list
SD-User at contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user


End of SD-User Digest, Vol 104, Issue 14
****************************************