[SD-User] USB Rig Control

Paul O'Kane pokane at ei5di.com
Sat Sep 5 12:23:38 EDT 2020


Rig control from SD works on all Kenwood rigs with USB ports.

Connect a USB cable from between your PC and the TS-590G, as described 
on Page 73 of your rig's manual. You'll need a USB cable with the 
corresponding connectors.  Then use SD's PORTS command to assign the 
appropriate port number for rig control.

73,
Paul EI5DI


On 05/09/2020 12:55, Robert Offer wrote:
> Hello
> I'm new to HF Contesting, SD and almost new to the TS-590SG.
> I want to set up for rig control for HF SSB NFD today and have been banging
> my head trying to connect, then discovered that it probably won't connect
> via USB - Why?
> I thought I'd try a serial cable I have for connecting to the radio -
> previously un used only to find that I have a reverse engineered port on
> the rear of the radio so the lead won't connect :(
> Is there any way I can get the computer to talk to the logging programme -
> the radio talks to the computer nicely but not the logging programme.
> Thanks
> Bob, G1ZJP
> _______________________________________________
> SD-User mailing list
> SD-User at contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user




More information about the SD-User mailing list