[SECC] [Dx4win] JT65A

[Courtney Judd]

ok, I use a 2000D hooked to my computer via a microKeyer 2 by microHAM. 
I downloaded JT65-hf and it seemed to be much simpler. I have com port 3 
for keying and rig control/freq etc selected as it is that way in the 
microHAM router. BUT, it will key but no audio received or sent and no 
freq showing. I have tried all combos of listed devices and no luck. 
Somehow I knew that this was not going to be easy!! lol any help/ideas? 
thanks Cort K4WI

> Joe Subich, W4TV <mailto:lists at subich.com>
> Thursday, August 11, 2016 10:32 AM
>
> On 8/11/2016 10:40 AM, Björn Ekelund wrote:
> > If you use any of Microham's USB enabled units (CW keyers, TNC, rig
> > controllers...) this functionality is built in.
>
> Only microHAM "Keyer" series interfaces (microkeyer, microkeyer II,
> digikeyer, digikeyer II, CW Keyer or MK2R+).  USB Interface II and
> USB Interface III do not provide the CAT/2nd CAT capability as they
> have no internal microprocessor.
>
> 73,
>
>    ... Joe, W4TV
>
>
>
> ______________________________________________________________
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20160811/c5cd005d/attachment.html>