[SECC] rtty issue
Courtney Judd
k4wi at k4wi.net
Thu Aug 9 11:08:28 EDT 2018
Hey All, still trying to figure out what is going on with my ft5000,
microKeyer2, dx4win and WIN10. Got it to receive rtty ok (tnx Joe) by
clearing out the privacy issue with win10 and sound control. BUT, when
ever I put the rig into RTTY mode the FSK led on the microKeyer starts a
rapid flashing and nothing I do will actually key the rig to send
rtty.... the mmtty window shows sending message but the rig does not key
up.... PTT issue somewhere. In SSB the foot switch no longer works...
checked it with a VOM and it is ok. CW works as it should... keys up and
sends normally. I completely un-installed the router software and
re-installed but no difference. This has to be a windows problem but I
have no clue where to start. Everything worked great prior to July 2
when I sent the radio back to Yaesu for front end repair so any
ideas/help would be much appreciated! 73's Cort K4WI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20180809/a31c6f42/attachment.html>
More information about the SECC
mailing list