[SECC] rtty

[Courtney Judd]

wow, Joe I know that you get tired of my weird "issues" and thanks so 
much for all of your time and effort to help me resolve this strange 
problem. Suggestion #2 below is what finally led me to what was the real 
problem. I had hooked a Yaesu MD-1 desk mike to the back port of the 
microKeyer2 and my heil headset to the front mike port on the 
microKeyer. The MD-1 has a switch TX-STBY on it... I guess in the 
process of hooking all this stuff back up the switch was moved to TX. 
Put it back to STBY and all my problems went away..... I feel so foolish 
but very happy to have it all working again!

Joe, you have been there for me so many times helping me with the crap I 
seem to get into and I REALLY appreciate you so much... I owe you one my 
friend! Thanks to all the others that offered advice too ! 73's Cort K4WI

> microHAM Support (W4TV) <mailto:support at microham.com>
> Thursday, August 09, 2018 9:41 PM
>
> Cort,
>
> 1) you have to have changed something in either MMTTY or Dx4win since
> you last had it working.  There is nothing in the hardware that can
> explain the change.
>
> 2) is the mic cable connected between MK II and the rig?  That is
> the most common explanation for the lack of PTT in SSB and RTTY
> (particularly if RTTY PTT is set to PTT_1).
>
> 3) You will see the FSK LED flicker when attempting to transmit
> RTTY if MMTTY/DX4win is activating PTT.  Since DX4Win can activate
> PTT independently of MMTTY, check the PTT Port in Dx4Win (Preferences
> -> CW -> Software CW Keying/PTT Control) and make sure RTS Line is
> set to PTT Control on the same port you have selected for PTT in
> Router.  Also *UNCHECK* the PTT box in the FSK port on Router.
>
> Finally, MAKE SURE you have selected "C: Limiting Speed" in
> MMTTY -> Option -> Setup -> Misc -> USB Port *and* have
> selected COM-TxD(FSK) in MMTTY -> Option -> Setup -> Misc
>
> All of these steps are documented in the example configuration
> for DX4Win and MK II.
>
> 73,
>
> ... Joe Subich, W4TV
>     microHAM America, LLC.
>     http://www.microHAM-USA.com
>     http://groups.yahoo.com/group/microHAM
>
>     support at microham.com
>
>
> This message, including any attachments, may contain proprietary, 
> confidential or privileged information for the sole use of the 
> specific individual(s) to whom it is addressed. You are hereby 
> notified that any disclosure, copying, distribution, or use of this 
> message is prohibited. If you have received this message in error, 
> please immediately notify the sender by reply e-mail and delete it.
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20180810/29336672/attachment.html>