[SECC] rtty

Courtney Judd k4wi at k4wi.net
Thu Aug 9 20:29:28 EDT 2018


more detective work but no closer to fixing this problem. I have 
eliminated the radio and foot switch  as a problem. Hooked the ft sw 
direct to the back of the 5000 and keys up rtty all ok. MMTTY stand 
alone, Dx4WIN/mmtty and writelog with mmtty all go into transmit and 
will show the F messages going out... except the radio is not keyed and 
no RF going out. All of the router settings, mmtty, dx4win and writelog 
are all the same as a month ago. Nothing is changed. Only thing 
different is the microKeyer 2 will not key the rig in SSB mode via the 
foot switch and will not key then rig in rtty mode. No problem with the 
CW mode. I have checked all the cables... seated nice and tight. I 
deleted the router software completely and re-installed and created all 
new virtual ports... no change. The FSK led flashes continuously when 
ever in rtty mode which it never did before. Starting to think the 
lightening that took out the 5000 front end also messed with the 
microKeyer. I just don't know where to go from here! Any ideas? so 
frustrating... 73's Cort K4WI
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20180809/1db531d3/attachment.html>


More information about the SECC mailing list