[SECC] CAT

[Courtney Judd]

hey Kevin, answer was right in front of me.... microKEYER 2 has CI-V 
output which the 2K-FA and the KPA1500 can read.... thanks to Joe W4TV 
for the help with this! 73's Cort

> Kevan Nason <mailto:knason00 at gmail.com>
> Sunday, July 29, 2018 5:21 PM
> Cort,
>
> Not sure what your application is so these may or may not work for 
> you. This was from a recent ARRL Contest update:
>
> Bob, N6TV, announces the release of the "Serial Box" (S-BOX), which is 
> a "configurable, passive nine-pin serial port Y-splitter and amplifier 
> interface box." According to Bob, it can provide automatic frequency 
> tracking and band change information from a nine-pin serial connector 
> on a modern transceiver to compatible amplifiers made by Elecraft, 
> ACOM, or SPE. The unit also features four configurable PTT outputs. 
> Bob has madeinformation, schematics, and photos available online 
> <https://bit.ly/S-BOX>.
>
> This is from Hamation. Was looking at maybe needing this for a SO2R setup:
> http://hamation.com/?CATRouter.html
>
> And last, haven't done this yet either, but if all you need is band 
> data and not exact frequency out then N1MM can output that on an 
> actual LPT port on a desktop computer. Put an LPT card in and use N1MM 
> to output the data. Bill, N4IQ told me about that. He uses it in his 
> SO2R setup. Uses a multiport LPT card. N1MM says it doesn't work with 
> a USB to LPT adapter though. It only outputs band data using an actual 
> LPT port.
>
> Kevan
> N4XL
>
> On Sun, Jul 29, 2018 at 7:45 AM, Courtney Judd <k4wi at k4wi.net 
> <mailto:k4wi at k4wi.net>> wrote:
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20180729/bf367016/attachment.html>