[SECC] ft5000

[Hal Kennedy]

Try some resets Cort.  The full-on master reset is your best shot, but that
wipes out every setting you have made in the menu items, etc.  If you do
that, copy down what's in your menus before you dump it all.  As an interim
step, there are one or more partial level resets that may work and not dump
all your settings.  If the resets fail....I'd call the Yaesu Service dept
in Cali next.  They are very helpful....

73
Hal N4GG


On Wed, Jun 27, 2018 at 5:46 PM, Courtney Judd <k4wi at k4wi.net> wrote:

> I think I am having a problem with my Ft5000 all of a sudden. The IPO has
> 4 selections for VFO A which is the main receiver. I normally use the AMP2
> selection which always gave the best signal level on the high bands. Now
> all of a sudden it seems to be deaf on all except the last one IPO2. All
> seems to be normal when listening on VFOB sub receiver. I am thinking that
> this is going to be a send back to Yaesu problem.... any ideas? sending
> back will cause extreme radio depredation issues with me for sure.... maybe
> I might have to buy a used 5000 to get me over the mental anguish I know I
> will have while it is gone! lol, 73's Cort K4WI
>
> _______________________________________________
> SECC mailing list
> SECC at contesting.com
> http://lists.contesting.com/mailman/listinfo/secc
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/secc/attachments/20180627/557ba374/attachment.html>