[SEDXC] need to borrow a good T2X control box.

[Guy Shields]

Dave,
I've got a control box I can lend you..
Guy Shields - W4GBU

David Thompson wrote:

>I am in the midst of trying to see if the box or the rotor has a bad
>direction pot.
>
>I finally got the rotor swap done with Brad at W9FX Rotor works.  After
>removing the old rotor and tightening down the screws that hold the mast in
>place
>those 25 to 45 MPH winds came and turned the beams 20 degrees plus put the
>mast out of plumb.  I worked several hours to get the rotor and mast plum
>and flat on the rotor plate but when I tested the rotor it moved around fime
>but the indicator was out.  W9FX thinks I either have unhooked the wires to
>the pot in the actual rotor or burned out the pot.
>
>I need to borrow a working Hy-gain T2X/Ham M/IV control box for a day or so.
>Anyone have one laying around?
>
>Thanks, Dave K4JRB
>
>
>_______________________________________________
>SEDXC mailing list
>SEDXC at contesting.com
>http://lists.contesting.com/mailman/listinfo/sedxc
>
>  
>