[SEDXC] Low budget antenna rotator (rotor) needed

[Rich Arland]

HI Gang:

I am scrounging the parts necessary for an AZ-EL SATCOM antenna rotator (rotor) system. In the "old days' there were any number of inexpensive TV rotors that allowed the antenna mast to be positioned completely through the antenna rotor housing. These were normally labeled "U-100" TV rotors. They were cast aluminum housings, light duty gears, best suited for small TV antennas, corner reflectors, etc. Currently Radio Shack and Channel Master have inexpensive 3-wire rotators that are mast mounted BUT the actualy antenna mast won't go through the housing. I have one of these for the azimuth control but desperately need one of the U-100 type rotors for the elevation control. Also needed is the control box. This can be in working or non-working condition, as they are not very difficult to bring up to speed.   

If you have what I need please contact me OFF_LIST (k7sz at live.com) or via telephone: 770-995-4214. 

vy 73 


es tnx


Rich K7SZ


	


	
	
_________________________________________________________________
Windows Live™: Keep your life in sync. 
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_BR_life_in_synch_062009