[Skimmertalk] aggregator ini rotation??

[paul_group at greenrover.demon.co.uk]

I have not fully assessed this information but asit reads those running 
remote unattended rbn may struggle here.

Anyway I'm off air for a few months til I can get to the machine.

Regards Paul LA/GW8IZR.

------- Original message -------
> From: Pete Smith N4ZR <n4zr at contesting.com>
> To: skimmertalk at contesting.com
> Sent: 21.2.'14,  21:08
>
> Paul, I am running the latest and do not have this issue. The intent in 
> making the Aggregator tray-resident like Skimserv, rather than letting it 
> close from the X is that people were accidentally closing it.  The thought 
> was to make it operate the same wayas SkimServ so habits would be the 
> same.
>
> 73, Pete N4ZR
> Check out the Reverse Beacon Network at
> http://reversebeacon.net,
> blog at reversebeacon.blogspot.com.
> For spots, please go to your favorite
> ARC V6 or VE7CC DX cluster node.
>
> On 2/21/2014 12:40 PM, paul_group at greenrover.demon.co.uk wrote:
>> Up until the latest upgrade the ini and indeed agregators knowledge of 
>> the skimsrv exe location was  retained.
>>
>> Unfortunately the latest update doesn't do that on my pc.
>>
>> I can't fix it by VPN over the slow hotel wifi so I'm sorry but I  can't 
>> advise on your question.
>>
>> But up til the latest update mine used to remember the ini file 
>> locations during rotation.
>>
>> ------- Original message -------
>>> From: David Robbins <k1ttt at arrl.net>
>>> To: skimmertalk at contesting.com
>>> Sent: 21.2.'14,  19:27
>>>
>>> I did just upgrade, but it didn't work on the last version I was 
>>> running
>>> either.  Now on 3.0, what is the zero at the start of each line in the
>>> skimmer traffic window???
>>>
>>> David Robbins K1TTT
>>> e-mail: mailto:k1ttt at arrl.net
>>> web: http://wiki.k1ttt.net
>>> AR-Cluster node: 145.69MHz or telnet://k1ttt.net
>>>
>>>
>>> -----Original Message-----
>>> From: paul_group at greenrover.demon.co.uk
>>> [mailto:paul_group at greenrover.demon.co.uk]
>>> Sent: Friday, February 21, 2014 17:02
>>> To: David Robbins K1TTT
>>> Cc: skimmertalk at contesting.com
>>> Subject: Re: [Skimmertalk] aggregator ini rotation??
>>>
>>> ------- Original message -------
>>>> From: David Robbins <k1ttt at arrl.net>
>>>> To: skimmertalk at contesting.com
>>>> Sent: 21.2.'14,  18:31
>>>>
>>>> Is there a trick to making the aggregator remember the ini file
>>>> rotation settings when you close and restart it??
>>>>
>>>>
>>>>
>>>> David Robbins K1TTT
>>>> e-mail:  <mailto:k1ttt at arrl.net> mailto:k1ttt at arrl.net
>>>> web:  <http://wiki.k1ttt.net/> http://wiki.k1ttt.net AR-Cluster node:
>>>> 145.69MHz or  <telnet://k1ttt.net/> telnet://k1ttt.net
>>>>
>>>>
>>>>
>>>> _______________________________________________
>>>> Skimmertalk mailing list
>>>> Skimmertalk at contesting.com
>>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>
>>> Yeah, don't upgrade to the latest version :-(
>>>
>>> GW8IZR Skimmer off air till I get back to uk someday to fix it.
>>>
>>>
>>> _______________________________________________
>>> Skimmertalk mailing list
>>> Skimmertalk at contesting.com
>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>
>>
>> _______________________________________________
>> Skimmertalk mailing list
>> Skimmertalk at contesting.com
>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>
>
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk