[Skimmertalk] QS1R current consumtion

[David Robbins]

What were you running before??   the 1.6a sounds about right for the QS1R if
you are running SkimmerServer software, it uses much more of the processing
power of the QS1R than other software.  If you change the number of bands or
the bandwidth the power consumption changes.

David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: Skimmertalk [mailto:skimmertalk-bounces at contesting.com] On Behalf Of
Igor Sokolov
Sent: Saturday, November 01, 2014 06:10
To: skimmertalk at contesting.com
Subject: [Skimmertalk] QS1R current consumtion

Hi all,
After updating RU9CZD skimmer  (QS1R based) to the newest skimmer software
our QS1R current consumption increased to 1.6 Amp. Is it normal or should we
suspect problem in QS1R?

73, Igor UA9CDC 

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk