[Skimmertalk] 10m beacon

[Pete Smith N4ZR]

Dear Dai - Please don't connect more than one receiver to the RBN on a 
given band segment at the same time.  Even with different SSIDs, this 
results in multiple spots, because SSIDs are not passed on through the 
RBN. Of course, one RX covering 28000-28100, and another covering 
281001-28300 is just fine, as is any other combination of multiple 
receivers, so long as they do not overlap in coverage.

The Aggregator can accept additional receivers on its Secondary Skimmers 
tab.  It recognizes as beacons any station signing [callsign]/B. There 
is no need to put them on any sort of list.

I hope this helps.

73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 4/18/2015 10:04 PM, Dai NAGAKURA wrote:
> Dear members
>
> de JF2IWL
>
> I started catching IBP beacon with QS1R and SkimmeServer,
> and suceeded.
>
> On 10m, I would not like to chop CW band
> then I will use 4Z5LV's AFEDRI SDR and Skimmer Serv for 10m.
>
> Q1/
> Can I make Watch.lst only to write these stations?
> http://www.qsl.net/wj5o/bcn.htm
> I wonder RBN recognizes these as BEACON.
>
> Q2/
> Now I am running skimmer by QS1R and Win7 PC.
> I use another WinXP PC and must use another Aggregator.
> Can I use aggregator with same SSID=JF2IWL in this PC?
>
> Please advice
> Thank you.
>
> Dai JF2IWL