[Skimmertalk] two aggregators

[David Robbins]

Well, it apparently doesn't matter if there are two connections with the
same call, I'm not sure how it builds the band list in the right side list
of aggregators.  One thing that does matter is 'k1ttt' is not searchable in
the spots where 'K1TTT' is.  So watch out on the rtty skimmer since you can
put that one in lower case.  The spots showed up but if I tried to search by
the spotting station on the rbn web site it failed.


David Robbins K1TTT
e-mail: mailto:k1ttt at arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net


-----Original Message-----
From: Skimmertalk [mailto:skimmertalk-bounces at contesting.com] On Behalf Of
David Robbins
Sent: Friday, January 23, 2015 23:58
To: skimmer at dxwatch.com; skimmertalk at contesting.com
Subject: [Skimmertalk] two aggregators

Ok, I just set up new machine with new qs1r for rtty skimmer. what is the
best way to connect two aggregators to the rbn??  Right now they are showing
up as "K1TTT" and "k1ttt" because I typed the rtty skimmer call in lower
case.  Does it matter if they are both "K1TTT" or should they be different
ssid's or something else to tell them apart??

 

David Robbins K1TTT
e-mail:  <mailto:k1ttt at arrl.net> mailto:k1ttt at arrl.net
web:  <http://wiki.k1ttt.net/> http://wiki.k1ttt.net AR-Cluster node:
145.69MHz or  <telnet://k1ttt.net/> telnet://k1ttt.net

 

_______________________________________________
Skimmertalk mailing list
Skimmertalk at contesting.com
http://dayton.contesting.com/mailman/listinfo/skimmertalk