[Skimmertalk] telnet command set for CW skim server via aggregator

Bob Wilson, N6TV n6tv at arrl.net
Sun Nov 13 21:48:29 EST 2016

When I TELNET to the Aggregator's TELNET port, SH/DX works fine.  It has to
be a different port number than the TELNET port provided by CW Skimmer,
e.g., don't use 7300 if that is where Skimmer is posting.

You set up the TELNET PORT for Aggregator on the *Connections* tab, at the
bottom, and must select "Send spots to local user".

Bob, N6TV

On Sun, Nov 13, 2016 at 4:00 PM, Jeff AC0C <keepwalking188 at ac0c.com> wrote:

> Are there any telnet responses that aggregator will provide from a client
> query?  sh/dx does not seem to work.
> 73/jeff/ac0c
> www.ac0c.com
> alpha-charlie-zero-charlie
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk

More information about the Skimmertalk mailing list