[Skimmertalk] telnet command set for CW skim server via aggregator

[Bob Wilson, N6TV]

Oh, and it only gives you spots posted in the last 5 minutes, no more.

73,
Bob, N6TV

On Sun, Nov 13, 2016 at 6:48 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> When I TELNET to the Aggregator's TELNET port, SH/DX works fine.  It has
> to be a different port number than the TELNET port provided by CW Skimmer,
> e.g., don't use 7300 if that is where Skimmer is posting.
>
> You set up the TELNET PORT for Aggregator on the *Connections* tab, at
> the bottom, and must select "Send spots to local user".
>
> 73,
> Bob, N6TV
>
> On Sun, Nov 13, 2016 at 4:00 PM, Jeff AC0C <keepwalking188 at ac0c.com>
> wrote:
>
>> Are there any telnet responses that aggregator will provide from a client
>> query?  sh/dx does not seem to work.
>>
>> 73/jeff/ac0c
>> www.ac0c.com
>> alpha-charlie-zero-charlie
>>
>> _______________________________________________
>> Skimmertalk mailing list
>> Skimmertalk at contesting.com
>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>
>
>