[Skimmertalk] telnet command set for CW skim server via aggregator

[Bob Wilson, N6TV]

Correction, Valid commands are:
     sh/dx         shows the last 10 spots
     sh/dx XX      shows the last XX spots
     sh/dx XXm     shows spots from the last XX minutes
     bye or Ctrl-D disconnect

73,
Bob, N6TV

On Sun, Nov 13, 2016 at 6:49 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Oh, and it only gives you spots posted in the last 5 minutes, no more.
>
> 73,
> Bob, N6TV
>
> On Sun, Nov 13, 2016 at 6:48 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>> When I TELNET to the Aggregator's TELNET port, SH/DX works fine.  It has
>> to be a different port number than the TELNET port provided by CW Skimmer,
>> e.g., don't use 7300 if that is where Skimmer is posting.
>>
>> You set up the TELNET PORT for Aggregator on the *Connections* tab, at
>> the bottom, and must select "Send spots to local user".
>>
>> 73,
>> Bob, N6TV
>>
>> On Sun, Nov 13, 2016 at 4:00 PM, Jeff AC0C <keepwalking188 at ac0c.com>
>> wrote:
>>
>>> Are there any telnet responses that aggregator will provide from a
>>> client query?  sh/dx does not seem to work.
>>>
>>> 73/jeff/ac0c
>>> www.ac0c.com
>>> alpha-charlie-zero-charlie
>>>
>>> _______________________________________________
>>> Skimmertalk mailing list
>>> Skimmertalk at contesting.com
>>> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>>>
>>
>>
>