[Skimmertalk] Multiple Installations

[Bob Wilson, N6TV]

I don't really understand exactly what you're trying to do, but OmniRig
supports a Rig 1 and Rig 2, on separate COM ports.  In CW Skimmer's
Settings, under the CAT tab, you indicate which OmniRig radio is the SDR
that you want CW Skimmer to use, either OmniRig Rig 1 or OmniRig Rig 2.
This is only applicable when you select radio type SoftRock-IF or 3 kHz
Audio. OmniRig supports multiple programs all at the same time, no problem,
and there should only be one instance of OmniRig running, and one
OmniRig.ini file.  COM0COM and OmniRig may not always work well together.
You might try VSPE instead, with one unique serial port for each SDR.

73,
Bob, N6TV

On Fri, May 4, 2018 at 7:47 AM, Roger Parsons via Skimmertalk <
skimmertalk at contesting.com> wrote:

> I have been trying to set up skimmer for two SDRs simultaneously, and am
> having some difficulties. Would appreciate any help.
>
> PC is running W7; Rig 1 is SDRStick + HDSDR; Rig 2 is Elad FDM-DUO +
> FDM-SW2; Both are set to Softrock IF; com0com for CAT.
>
> I have followed K8ND's excellent tutorial on configuring multiple
> instances on one PC, G4ZFQ's information on setting up HDSDR and the Elad
> information on FDM-SW2 with CW Skimmer.
>
> So far so good. Each installation interfaces and works properly
> individually, and each installation selects its own .ini file. However,
> whilst Omnirig works well, I can't see how to have separate instances for
> each of the skimmers. (The installations each have a separate pair of
> virtual ports between receiver and skimmer.) The effect of this is that I
> load one installation and all is well, load the second and it takes the
> Omnirig parameters from the first installation and of course doesn't
> properly connect.
>
> Help!
>
> 73 Roger
> VE3ZI
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://dayton.contesting.com/mailman/listinfo/skimmertalk
>