[Skimmertalk] RP-16 static IP

[Bob Wilson, N6TV]

I have never bothered to try to set up the RP to use static IP addresses.
An easier solution is to power the Router with a beefy UPS.

Nevertheless, Pavel Demin's Red Pitaya Notes page
<http://pavel-demin.github.io/red-pitaya-notes/alpine/> explains what to do
(sort of):

"The configuration of the IP addresses is in /etc/dhcpcd.conf
<https://github.com/pavel-demin/red-pitaya-notes/blob/master/alpine/etc/dhcpcd.conf>.
More information about /etc/dhcpcd.conf
<https://github.com/pavel-demin/red-pitaya-notes/blob/master/alpine/etc/dhcpcd.conf>
can
be found at this link <https://www.mankier.com/5/dhcpcd.conf>."

73,
Bob, N6TV


On Tue, Dec 14, 2021 at 11:11 AM Brad Denison <brad.denison at gmail.com>
wrote:

> I noticed today that during a double power outage that the RP-16 seems to
> fall back to the default IP address, likely due to the fact that the router
> was not on backup and that the RP-16 lost it's IP.  Would like to confirm I
> am making the correct assumptions for dhcpcd.conf to force static IP's:
>
> 1) To set static IP I would need to change *both* eth0 and mv10?
>
> 2)  Under eth0 and mv10
> static ip_address=192.168.1.100/24   (change to desired static IP)
> static routers=192.168.1.1  (change to router IP)
> static domain_name_servers=192.168.1.1  (Change to router IP or other DNS
> server)
>
> Do I have this correct or am I missing something?
>
> Thanks,
>
> Brad, W1NT
> _______________________________________________
> Skimmertalk mailing list
> Skimmertalk at contesting.com
> http://lists.contesting.com/mailman/listinfo/skimmertalk
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20211214/4e8568f4/attachment.html>