[Skimmertalk] Red Pitaya

[William Liporace]

OK,
I have absolutely NO idea what changed.. I'm on the spare. It is working 
perfectly. I just went through ALL of the files again. Cleaned up a few 
log files and now it is all up and running correctly. I want to revisit 
the old unit with a fresh SD card. As far as I remember, they were both 
setup by you. At the time, you couldn't run everything (CW, RTTY, 
Digital) on one device (If I remember).

I will look at setting up a spare PC and play around. Worst case, make a 
copy of the working SD card and go from there. I have not looked at 
updates or changes in long time. I think I have kept up with most of the 
software.

Will WC2L

On 6/2/2024 11:33 PM, Bob Wilson, N6TV wrote:
> I forgot to ask, did you move SD cards between the two RPs?  If not, 
> does the new RP have a copy of apps/sdr_receiver_hpsdr_122_88/start.sh 
> in the root folder to automatically start the SDR receiver app?
>
> 73,
> Bob, N6TV
>
>
> On Sun, Jun 2, 2024 at 8:31 PM Bob Wilson, N6TV <n6tv at arrl.net> wrote:
>
>     As I recall, you have a very complex network environment.  The
>     SkimmerPC and the Red Pitaya have to be on the same subnet of the
>     same LAN or else HermesIntf_xxxx.dll will not be able to locate
>     the RP via its MAC access.
>
>     xxxx must be the last 4 bytes of the new RP's MAC address.  Do not
>     change SkimSrv.ini.
>
>     After editing CWSL_Tee.cfg (must be done with Administrator
>     privileges otherwise it gets saved in a "Virtualstore" folder that
>     CWSL_Tee.dll will not find).
>
>     Finally, after editing CWSL_Tee.cfg, you have to copy it to the
>     C:\RBN folder or wherever Aggreagtor.exe is stored.
>
>     73,
>     Bob, N6TV
>
>
>     On Sat, Jun 1, 2024 at 8:49 PM William Liporace <wc2l at wc2l.com> wrote:
>
>         OK, I guess I'm stumped..
>         My long time Red Pitaya is tossing errors.
>         SDR Failure:Timed out waiting for UDP data
>         Error Access violation at 0x774854E5 (tried to write to
>         0x00000014), program terminated.
>
>         When I place my other Red Pitaya in the line.
>         If I remember correctly, I need to change
>         CWSL_Tee.cfg, Rename HermesIntf_xxxx.dll, modify SkimSrv.ini
>
>         I can SSL to the new address. it will bascially not run.
>         Seems like is has no idea where DeviceName=01 CWSL_Tee on
>         RP-F07CD2 v25 is. (not sure v25 is needed)
>
>         SkimSrv in the receiver say it is 01 CWSL_Tee unknown
>
>         Ideas, what am I doing wrong? not what I expected.
>
>         Will WC2L
>
>         -- 
>         William Liporace WC2L
>         http://www.wc2l.com  orhttp://dxc.wc2l.com
>         AR-Cluster Node  telnetdxc.wc2l.com  <http://dxc.wc2l.com>  7373 or 144.93 MHz
>         wc2l at wc2l.com
>
>         _______________________________________________
>         Skimmertalk mailing list
>         Skimmertalk at contesting.com
>         http://lists.contesting.com/mailman/listinfo/skimmertalk
>
-- 
William Liporace WC2L
http://www.wc2l.com  orhttp://dxc.wc2l.com
AR-Cluster Node  telnet dxc.wc2l.com 7373 or 144.93 MHz
wc2l at wc2l.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.contesting.com/pipermail/skimmertalk/attachments/20240603/6c614792/attachment.html>